Pre-soldered Raspberry Pi Pico 2 Microcontroller Board Based on Raspberry Pi RP2350 Microcontroller Chip, with Dual-core and Dual-Architecture Design, Running up to 150 MHz (with Header)
En stock
0.30 kg
Sí
Nuevo
Amazon
USA
- Overview Pre-Soldered Rasp Pi Pico 2 with header pin is a low-cost, high-performance microcontroller board with flexible digital interfaces. Based on Raspberry Pi's own RP2350 microcontroller chip, with unique dual-core and dual-architecture design, running up to 150 MHz, embedded 520KB of SRAM and 4MB of on-board Flash memory, as well as 26x multi-function GPIO pins. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available. There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly. Key features --RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom --Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz --520KB of SRAM, and 4MB of on-board Flash memory --Castellated module allows soldering direct to carrier boards --USB 1.1 with device and host support --Low-power sleep and dormant modes --Drag-and-drop programming using mass storage over USB --26 × multi-function GPIO pins --2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 24 × controllable PWM channels --Temperature sensor --12 × Programmable I/O (PIO) state machines for custom peripheral support Package Content --Pico 2 with pre-soldered header x1 --1*3PIN yellow pin header x1 --USB-A to micro USB cable ~1.2m x1
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Pico 2 RP2350 microcontroller board with pre-soldered header, based on Raspberry Pi's own RP2350 microcontroller chip, adopts dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz Pre-soldered Raspberry Pi Pico 2 microcontroller embedded 520KB of SRAM, and 4MB of on-board Flash memory, as well as 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 24 × controllable PWM channels USB 1.1 with device and host support, low-power sleep and dormant modes, drag-and-drop programming using mass storage over USB, Temperature sensor Castellated module allows soldering direct to carrier boards, 12 × Programmable I/O (PIO) state machines for custom peripheral support For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, complete online development resources and tutorials to help you get started easily. Feel free to contact us for more information