Artículo: AMZ-B0FR99NCGF

Musrock

2pcs CS1238 24-bit ADC Module with TL431 Reference for Dual-Channel Load Cell Precision Sensor Interface

Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • 【High-Precision Dual-Channel ADC Module】 24-bit resolution; 20.7 effective bits @ 5V; dual differential input channels; programmable PGA gain 1/2/64/128 times; Suitable for low-level signal acquisition
  • 【Wide Voltage and Temperature Range】 Operates on 2.7V to 5.5V DC; -40°C to +85°C industrial temperature rating; onboard TL431 reference source with 0.5% accuracy; stable performance in harsh Settings
  • 【Low Power Consumption and Energy Efficiency】 Typical operating current ≤1.2mA; standby current ≤0.1µA; 72-hour operation with 2000mAh battery; suitable for portable and battery-powered systems
  • 【Flexible SPI Interface and Configuration Options】 2-wire SPI protocol up to 1.1MHz; programmable output rate 10Hz to 1.28kHz; PGA and rate selection via external pins; easy integration with microcontrollers
  • 【Robust Design for Reliable Performance】 Built-in self-calibration algorithm; shielded wiring support; anti-interference layout; compatible with for Arduino and STM32 platforms; minimal calibration drift under varying conditions
$32,81
60% OFF
$13,13

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$32,81
60% OFF
$13,13

Difiere a 3 y 6 meses sin intereses con Diners, Discover y Titanium

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito, Crédito y Deuna

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

Product Parameters ( ):​​ ​​Master Chip:​​ CS1238-SOP14 (Chipsea Tech , Reliable) ​​Supply Voltage:​​ DC 2.7V-5.5V (Wide Voltage Compatible, Ripple ​​ADC Resolution:​​ 24-bit No Missing Codes, Effective Number of Bits (ENOB): 20.7-bit @ 5V (PGA=128) ​​Input Channel:​​ Dual Differential Input (AIN1+/AIN1-, AIN2+/AIN2-) ​​PGA Gain:​​ Programmable 1/2/64/128 (Default: 128) ​​Output Rate:​​ Programmable 10Hz/40Hz/640Hz/1.28kHz (Default: 10Hz) ​​Reference Voltage:​​ Onboard TL431 Precision Source, Output 2.5V ±0.5% (Temp. Drift ≤30ppm/℃) ​​Interface Protocol:​​ 2-wire SPI (SCLK, DOUT/DRDY), Max Rate 1.1MHz ​​Operating Temperature:​​ -40℃ ~ +85℃ (Industrial Wide Temp Certified) ​​Power Consumption:​​ Operating Current ≤1.2mA (Typ. @10Hz); Standby Current ≤0.1μA (Shutdown Mode) ​​Main Pin Functions ( ):​​ ​​VDD:​​ Power Supply Positive (2.7V-5.5V DC). Parallel 10μF ceramic + 0.1μF filter caps, trace length ≤3cm. ​​GND:​​ Power/Signal Common Ground (Single-point star grounding, impedance ≤0.1Ω). ​​VREF:​​ Reference Voltage Input (Onboard TL431 output, 2.5V ±0.5%, load current ≤10mA). ​​AIN1+:​​ Channel 1 Non-inverting Input (Connect to load cell excitation+, input impedance ≥1GΩ, differential voltage ±20mV). ​​AIN1-:​​ Channel 1 Inverting Input (Same as AIN1+ spec, wiring length matching deviation ≤0.5mm). ​​AIN2+:​​ Channel 2 Non-inverting Input (Same as AIN1+). ​​AIN2-:​​ Channel 2 Inverting Input (Same as AIN1-). ​​SCLK:​​ SPI Clock Input (MCU clock pin, rising edge sampling, frequency ≤1.1MHz). ​​DOUT/DRDY:​​ Multiplexed Pin: SPI Data Output (24-bit ADC value) / Data Ready Indicator (Active Low).