FEETECH FS90R 360 Degree Continuous Rotation Micro Servo Motor 9g Servo for RC Helicopter Airplane Car Boat Robot Controls

Size:

360°-FS90R

360°-FS90MR-C001

360°-FS90R

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.30 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

The FS90R is an analog micro servo that is capable of continuous rotation clockwise or anti-clockwise, as opposed to moving to a set position. The servo can be controlled using any servo code, hardware or library and to control with an Arduino, just connect the orange control wire to pin 9 or 10 and use the Servo library included with the Arduino IDE. Good for beginners who want to make stuff move without having to use a motor controller, especially since it will fit in small places. They may require some simple calibration, simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving.

S/ 225.11

60% OFF

S/ 90.03

S/ 225.11

60% OFF

S/ 90.03

Llega en 5 a 10 días hábiles

con envío

Tienes garantía de entrega

Medios de pago

Cantidad

Medios de pago

Conoce más detalles

MINI REMOTE CONTROL SERVO : 5 packs FS90R RC servo is composed of PC plastic shell, POM gear, iron core shaft, light weight and small size. HIGH ROTATION SPEED SERVO: the servo rotation angle is 360 degrees (at 1200→1800μsec), and the dead zone width is ≤90 μsec, compatible with Arduino and Raspberry Pi LARGE COMPATIBLE MOTOR: This servo system is pulse-controlled, compatible with 1/8 and 1/10 scale remote control robots, trucks, off-road vehicles, robotic arms, and any application that uses standard servo systems STRONG STALL TORGUE MOTOR: (4.8V) 18.09oz/in(1.3kg/cm), (6V) 20.86oz/in(1.5kg/cm) The working voltage is 4.8V-6V. Small size but enough power, strong stability. INTERFACE TYPE: Compatible with JR, the cable is made of PVC material, the length of the wire is 25cm.