Enhon 4 Pack Replacement for H Track Dead End I Connector Compatible with WAC Lighting H Track Systems, 3 Wire 1 Track Lighting Replacement for H Track System Track Lighting Accessories(Black)

Conoce más detalles

[Applicable Models]: "I" type connector track accessories are replacement for H type three wire tracks, suitable voltage: 120V, size: 1.3 x 3.1 x 0.7 inches; Replacement for H type single circuit 3 wire track lighting connectors, replacement for H type 3 wire 1 circuit track; This connector is replacement for H tracks, please purchase it after confirming what type of track you have [Easy to Install]: (1)Locate the grounding point between the connector and the track; (2)Confirm the direction is correct, and then connect the track and connector; (3)Tighten the screws; (4)The installation is completed; The replacement for H track dead end I connector is applied to minimize the track connection space and save space, no additional accessories are required, it can be installed in just a few steps, easily solving the problem when you need to extend the track to cover more areas [Warm Reminder]: after installation, if the track system is not powered on, please check whether the installation has the following abnormalities: 1. Whether the wiring hole on the back of the product is damaged, scratched, or pierced the internal short wire; 2. The "ground wire shrapnel" of this product is not cut off as required; 3. The access direction is wrong and the "ground copper wire" inside the track is not touched, resulting in not grounded [Replacement for H Type Track]: it is 3 wire 1 circuit (single circuit) track lighting system; It has 3 metal clips, two on one side and one on the other; Replacement for H tracks have three; The three types of track lighting parts don't mix and match; This product is not replacement for L- and J-tracks [Quality]: using flame retardant materials, safer to use; Trustworthy quality