Solar Tracking Module Automatic Tracker Single Axis Solar Tracking Module Search Light Solar-Powered Automatic Tracker Board 5V-5.5V DC
En stock
0.30 kg
Sí
Nuevo
Amazon
USA
- Solar Tracking Module Automatic Tracker Single Axis Solar Tracking Module Search Light Solar-powered Automatic Tracker Board 5V-5.5V DCDescription:Name: single axis light source tracking boardSize: 35*16*1.2mmVoltage: DC 5-5.5VCurrent: <1.5AInterface: power +/-, motor MPrinciple:Put a shelter on the photosensitive resistor; when the light shines on the shelter and forms a shadow, one resistor generates a difference with another resistor; control the motor and to find the balance point, that is the central point of the light sourceApplications:reduction motors; the slower of the speed is, the better it will be.We recommend use JGY370 6V. When the power supply is 5V, it has no load and stable speed.If the speed of is too fast, the motor will not aim at the light source and sway but not shake.This circuit adopts anti-shaking short delay.Connection:when the motor connects the board, there is no difference of positive and negative. When testing, if the motor rotates toward the opposite direction of the light source, then change the motor wire positionNote: the power should be stabilivolt 5-5.5V, and it cannot connect the solar boardWiring diagram:1.Probe wire length is 15cm
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Solar Tracking Module Automatic Tracker Single Axis Solar Tracking Module Search Light Solar-powered Automatic Tracker Board 5V-5.5V DC single axis light source tracking board Size: 35*16*1.2mm Voltage: DC 5-5.5V Principle: Put a shelter on the photosensitive resistor; when the light shines on the shelter and forms a shadow, one resistor generates a difference with another resistor; control the motor and to find the balance point, that is the central point of the light source Note: the power should be stabilivolt 5-5.5V, and it cannot connect the solar board Connection: when the motor connects the board, there is no difference of positive and negative. When testing, if the motor rotates toward the opposite direction of the light source, then change the motor wire position