SKU/Artículo: AMZ-B0DSL8CPD9

MakerFocus

MakerFocus 5pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (Pre-Soldered, White)

Size:

2pcs Blue

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
0.30 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

0.91-inch I2C IIC OLED display module is a mini display screen with 128 x 32 resolution and SSD1306 chipset Standard IIC communication interface pinout and these modules can be controlled by I2C, compatible with most platform such as Arduino, Raspberry Pi, ESP, etc Features: 0.91-inch OLED screen, support black and white dual-color display 128x32 resolution, display clearly, high contrast Large viewing angle, greater than 160° Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no need for level conversion chip Adopting IIC bus, only a few IOs are needed to light up the display Ultra-low power consumption: Normal display is only 0.06W (much lower than TFT display) Military-grade technology standard, long-term stable operation Provide underlying driver technical support Parameters: Driver Chip:SSD1306 Resolution: 128*32 Colour: White Viewing Angle: >160° Power Consumption: 0.06W Wide Voltage Support: 3.3V-5V DC Working Temperature: -20℃-60℃ Storage Temperature: -30℃-70℃ VCC Power Supply Voltage: 3.3V-5V Touch Screen Type: No Touch Screen Touch IC: No touch IC Interface: IIC interface Pin Definition: GND: Ground VCC: 3.3V/5V SCL: Serial Clock SDA: Serial Data Size: Screen Size: 0.91-inch Effective Display Area (AA area): 22.38x5.584mm PCB Backplane Size:12x38mm Package Content: 5 * 0.91-inch IIC I2C OLED Display Module

S/ 114.72

55% OFF

S/ 52.14

S/ 114.72

55% OFF

S/ 52.14

Llega en 5 a 10 días hábiles

con envío

Tienes garantía de entrega

Medios de pago

Cantidad

Medios de pago

Conoce más detalles

128 x 32 Pixel: Needn't backlight, these OLED module can self-luminous. It has super high contrast, bright and crisp dots, viewing angle is greater than 160°, even tiny fonts quite readable No Embedded Fonts: There are no embedded fonts inside these Arduino display module, you can create the fonts through font generation software Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, ESP32 development board and so on. Showing graphical & textual information directly of your machines Parameters: Screen Size: 0.91-inch; Driver Chip:SSD1306; Resolution: 128*32; Color: White; Viewing Angle: >160°; Power Consumption: 0.06W; Voltage: 3.3V or 5V DC; Working Temperature: -20℃-60℃ What You Get: You will get 5 pieces 0.91-inch I2C OLED display module

MakerFocus 5pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (Pre-Soldered, White)

Conoce más detalles

MakerFocus 2pcs 0.91 Inch I2C IIC OLED Display Module 128 x 32 Pixel SSD1306 Driver Self-Luminous Display Board for Arduino/Raspberry Pi/ESP32 (White)