SKU/Artículo: AMZ-B0DSD3V92V

GODIYMODULES

2PCS Adjustable Mini LM386 Audio Power Amplifiers Home Board Micro Amplifier Module Max 750MW High Efficiency DC 3~12 V 5V

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
0.30 kg
Devolución:
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • This module is based on the classic design of the chip LM386, strong expansion capabilities, but also has a lot of novel games are played: audio amplifier, headphone amplifier, signal amplification, electret pickup for DIY players Development.Basic parameters:Operating voltage: 3V-12V (voltage below 4V will significantly reduce the sound, the maximum can not exceed 15V);Operating current: 1mA (static) to 150mA (max);Output speaker impedance: 4Ω-32Ω (impedance high-sound, high efficiency);Support the speaker power: 0.5W-25W (In fact, any power speaker can be used, the volume and the speaker power is not much relationship, as long as greater than the amplifier output rating on the line, a large speaker sound may be larger);Output power: 750mW (max);Volume: 20(L) mm * 12 (W) mm * 7.5(H) mm;Used to do the microphone pre-amplification is very good, very low noise and AC ripple, the output signal voltage greater than 1V or more, to promote the post-amplifier signal value is very strong.Output volume can be fine-tuning range: 0 ~ 100%, on-board only fine-tuning potentiometer, the conventional volume can be directly adjusted by the source control.
S/ 56.98
49% OFF
S/ 29.22

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

S/ 56.98
49% OFF
S/ 29.22

Hasta 6 cuotas sin intereses con BCP, BBVA y Diners

Llega en 5 a 10 días hábiles
con envío
Tienes garantía de entrega

Conoce más detalles

2Pcs Adjustable Mini Amplifier LM386 Audio Power Amplifiers Home Board Micro AMP Module Max 750MW High Efficiency DC 3~12 V 5V Operating voltage: 3V-12V (voltage below 4V will significantly reduce the sound, the maximum can not exceed 15V) Used to do the microphone pre-amplification is very good, very low noise and AC ripple, the output signal voltage greater than 1V or more, to promote the post-amplifier signal value is very strong. Output volume can be fine-tuning range: 0 ~ 100%, on-board only fine-tuning potentiometer, the conventional volume can be directly adjusted by the source control. Support the speaker power: 0.5W-25W (In fact, any power speaker can be used, the volume and the speaker power is not much relationship, as long as greater than the amplifier output rating on the line, a large speaker sound may be larger); Output speaker impedance: 4Ω-32Ω (impedance high-sound, high efficiency); Operating current: 1mA (static) to 150mA (max);