STASRC V-Tail Mixer Double Motor Speed Difference Controller for RC Model
En stock
0.30 kg
Sí
Nuevo
Amazon
USA
- Size: 31mm(L) * 8mm(w) * 8mm(H) Mixing Rate: 1:1 (Fixed) Precision: 200 Steps 1-way ratio is 100% (usually the throttle) 2-way ratio is 100% (usually steering) Steering priority; value range limited to 1000-2000us It is suitable for the control of double motor speed difference, such as airplanes, cars, ships, etc. When there is no input in the speed difference mode, there will be no output signal. One-way ESC: Please set the throttle failure protection to low throttle 1000. Two-way ESC: Please set the throttle runaway protection to 1500 for the medium throttle (for example: if the throttle is 3 channels, it should be set to 1500 instead of 1000, because the runaway protection is set to 1000, after you turn off the control, it will receive and output 1000 pairs of two-way ESCs. Adjustment is full speed reverse) or use 2 channels for the throttle (fail control protection is generally 1500), or turn off the model power first and then turn off the control. When powered on, if the low throttle signal (PWM<1250ms) is identified as a one-way ESC, the direction signal of the one-way ESC will also be invalid when the throttle is stopped (PWM<1100ms). safer) When there is no input in the delta wing and V tail mode, the dual output 1500 is convenient for you to debug (but do not touch the input signal line to avoid interference)
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
This device is an advanced electronic servo mixer for "Flying Wings" or "V-Tail Aircraft". With such a device, both elevator and aileron/rudder functions can be combined together. It is suitable for the control of double motor speed difference, such as airplanes, cars, ships, etc. V-Tail Mixer double motor speed difference controller