SKU/Artículo: AMZ-B09RC5YZ5S

SYSTEMTHREE

System Three G-2 Epoxy Adhesive, 12 Ounce Kit

Size:

12 Ounce

1.5 Gallons

12 Ounce

15 Gallons

24 Ounce

48 Ounce

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
0.62 kg
Devolución:
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • For over 35 years, G-2 has been an excellent adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight. No clamping pressure is required. After fully curing it can be machined, drilled, sanded and tapped.
S/ 226.88
49% OFF
S/ 116.35

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

S/ 226.88
49% OFF
S/ 116.35

Hasta 6 cuotas sin intereses con BCP, BBVA y Diners

Llega en 5 a 10 días hábiles
con envío
Tienes garantía de entrega

Conoce más detalles

Epoxy Adhesive: G-2 is a high-performance, waterproof epoxy adhesive that excels in woodworking applications; It works well with all soft and hardwood species, and performs exceptionally well with oily, tropical woods Long Working Time: With 1.5 hrs of working time, and a convenient 2:1 mix ratio, our solvent-free G-2 epoxy adhesive is an excellent choice for fine interior and exterior joinery and furniture applications Curing: At 70°F, G-2 develops good properties within 16-20 hours, and cures to a clear, amber appearance; It’s best to leave G-2 clamped during this timeframe and to avoid stressing the joint for at least 72 hours Measure & Mixing: Mix 2 parts Resin with 1 part Hardener, combine until the mixture is uniform in color; Small quantities have a longer pot life than larger batches, warmer temperatures shorten the pot life, while cold temperatures lengthen it Clean Up: Cured product can be removed with paint stripper, but clean squeeze out immediately with lacquer thinner or denatured alcohol; Optionally, you can wait till G-2 is semi-hard, and trim it with a razor blade or remove with a paint scraper