MGC100 Generator Set Controller - Automatic Start/Stop Control Module for Small Gasoline Generator Sets
En stock
0.32 kg
Sí
Nuevo
Amazon
USA
- Specification: Item Type: Generator Set Controller Material: ABS Working Voltage: DC9.0V to 18.0V continuous power supply - suitable for DC12V system Whole Machine Power Consumption: Normal <1W, standby state <0.4W Alternator Voltage Input: Three-phase four-wire AC30V- AC360V (-N) Three-phase three-wire AC50V- AC620V (-) Two-phase three-wire AC30V- AC360V (-N) Single-phase two-wire AC30V- AC360V (-N) Alternator Frequency: 50Hz/60Hz Package List: 1 x Generator Set Controller 2 x Bracket 1 x Wiring Frame 1 x Manual How to Use: Remote start sequence: 1. When the remote power‑on input is valid, enter the power‑on delay. 2. After the power‑on delay is over, the preheating relay output (if configured) enters the preheating delay. 3. After the preheating delay is over, the fuel relay outputs for 1s (if configured as fuel output), then the start relay output and the preheat relay are disconnected; if the genset does not start successfully within the starting time, the fuel relay and start relay stop output , Enter the start interval time, and wait for the another start (after the start interval time delay starts 3s, the preheating and energized shutdown will start output, after the start interval, the energized shutdown output will be disconnected, and the fuel output will be preheated after 1s. The output is disconnected). 4. Within the set number of starts, if the genset fails to start successfully, the start failure alarm indicator will light up. 5. At any start, if the start is successful, it will enter the running time. During this time, the low oil pressure input and the under‑pressure alarm are invalid. After the running delay is over, it will enter the start‑up idle delay (if the start‑up is idle The delay is configured).
Conoce más detalles
Generator Set Start & : Used to start and a single generator set, realize the manual and remote start and stop of the generator set, data measurement, alarm indication, shutdown , etc. LED Digital Tube Display: Light touch button to achieve measurement of various parameters, all configuration parameters can be adjusted from the front panel of the controller Easy Installation: The gasoline generator set controller has the advantages of simple operation, operation, compact structure, and convenient installation For & Gasoline Generator: The auto start stop control module can be widely applicable to data display and fault of various small and gasoline generator sets Embedded Installation Method: Modular structure design, flame retardant ABS plastic shell, embedded installation method, small size and easy installation