UPNE-TECH Solar Pump Controller; LCB 16Amp DC Pump Controller; Linear Current Boosters; 12V/24V Compatible; 14-55V DC Input; 16A Max Output
En stock
0.50 kg
Sí
Nuevo
Amazon
USA
- 1.Linear Current boosters used in solar direct pumping applications ; 2. DC power converters which are designed to be an interface between a DC solar pump and solar panels.; 3.The controller can be used in both 12V and 24V systems . 4.They can achieve a 30-90% increase in water pumped compared to connecting the pump directly to the solar modules. 5. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels. 6.Maximum of 380-watt of solar recommended for most applications. 6.Increases daily water output up to 30-90 percent. 7. Maximum Current Output 16 Amps. 8. Maximum Solar PV Array Input Voltage 55VDC Open Circuit., 9. Input Voltage: 11 - 50 DC volts PV Array, 10. Current: 3 - 16 DC Amps, 11.As soon as the controller is supplied with power from Panels, it starts a self test routine. At the beginning, all LEDs flash twice, then Green LED and Yellow LED are on.Then Controller starts to work with PWM output for 5 seconds, then keeps output without PWM for 10 seconds. After Self test, it continues to keep output until float switch on.if No connected to load within 15 seconds ,the controller will be protected with red LED on. 12.Normally, The controller will be enabled when PV voltage rises above 14V(12V systems)/28V(24V systems). And disabled when PV voltage downs to 11V/22V. 13. Controller has Automatic over current protection, low current protection and low output voltage protection. When output current over 21A or short circuit, or output current lower than 3A, or output voltage lower than 11V/22V, protection works with Red LED on. After 15 minutes, the controller will retry to output, 14.Low Water Cut off :The controller features a low water cut-off that will automatically cut power to the pump when well water has been drawn down below the pump of inlet. 15 In order to improve waterproofing and heat dissipation, the circuit board is coated with oxidized resin.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Linear Current Booster: Used in solar direct pumping applications, compatible with 12V or 24V DC pumps Voltage Specifications: Maximum solar PV array input voltage 55VDC open circuit, input range 11-50V DC Current Output: Maximum current output of 16 amps with automatic over current protection and low current protection System Compatibility: Controller can be used in both 12V and 24V systems with float switch terminals Performance Enhancement: Achieves 30-90% increase in water pumped compared to direct pump-to-panel connection Power Capacity: Supports maximum of 380-watt solar power for optimal system performance Safety Features: Includes automatic protection against short circuit, low current, and low output voltage conditions Water Protection: Features low water cut-off functionality to protect pump when well water level is too low