Walfront Sequence Detector AC 70-1000V 1000C Non-Contact Sequence Detector Indicator Magnetic Base Phase Meter Rotation Monitor Phase Meter
En stock
0.43 kg
No
Nuevo
Amazon
USA
- Specification: Model:ETCR1000C Power Supply:DC 3V2*AA dry battery , Continuously working for 70 hours AC Voltage Range(V) AC 70 - 1000V, 40/65Hz (Sine Continuous Input) Clamp Wire Size:External Diameter 1.6-16mm LED Display (Positive Phase Sequence) The four phase-sequence lamps light in order (clockwise). (Negative Phase Sequence) The four phase-sequence lamps light in order (counterclockwise). (Live Power)L1,L2,L3 lamp light up in the voltage setting range. (Phase Loss) L1 or L2 or L3 does not light. (Short Circuit)L1 or L2 or L3 does not light. Buzzing: (Positive phase) The instrument emits intermittent short beeps; (Reverse phase) The instrument emits a continuous long beep. Power On Indication:Power on indication light turns on; Low power, low battery light on Magnetic force:Four magnets on the back of the meter, which are attached to the distribution box and can withstand 800g quality. Auto Power off:After 5 minutes, the meter automatically cut off power supply. Meter Dimension:Width, height, thickness 70mm*75mm*30mm Clamp Length:0.6m Weight: 317g Working Temperature and Humidity:-10℃-55℃; below 80%rh Storage Temperature and Humidity:-20℃-60℃; below 90%rh Maximum Measured Voltage:AC 1000V Dielectric Strength:5.4kVrms Maximum rated Power:100mVA Safety Provisions:EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT 3 (600V), Transient over-voltage 6000V Package list: 1 * Non-Contact Phase Sequence Detector 1 * User Manual Note: The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
【Properties】Phase sequence detection, live line check, simple power check, live wire identification, phase loss judgment, wire break position search, DC line break point detection, line maintenance. 【Safe To Use】Clamp-type non-contact inductive measurement, directly clamp the three super-inductive high-insulation clamps to the insulation skin of the three-phase live wire to detect 【Non-contact Inspection】Non-contact inspection for and fast productivity. live wire examination, simple Power detection, breakpoint location and line maintenance. 【Dynamic Indicates 】The dynamic sound and light indicates the positive or negative phase of the phase sequence of the three-phase power supply, which is clear at a glance. 【4 Magnets for Testing】The bottom plate of the instrument is equipped with 4 magnets, which can be attached to the metal casing of the equipment during testing, and the is convenient and convenient.