SKU/Artículo: AMZ-B06XTBPNK7

Edge Technology

Edge Technology 16-000 Pro Mill Stop - Milling Workstop for 6" Vises, Repeat Setup with Rotating Arm for Total Clearance, Fast, Accurate Part Setup, Fits 5/8” T-Slot

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
1.24 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

The Pro Mill Stop by Edge Technology can be mounted on any available T-slot anywhere along the milling machine table allowing it to accurately locate a workpiece for any type of setup. It is designed to keep the stop rod square to the work piece throughout the entire range of motion. This configuration provides a more consistent locating surface for increase part accuracy. The base of the unit is also keyed to the T-slot of table for increased consistency. After locating the workpiece the arm of the Pro Mill Stop can be rotated out of the way for total cutter clearance. The arm can then be accurately repositioned for repeat setup. Fits 5/8" T-slots only. Protected by one or more US patents. **Will not fit bench top mills**

S/ 610.30

49% OFF

S/ 312.97

S/ 610.30

49% OFF

S/ 312.97

Llega en 10 a 15 días hábiles

Tienes garantía de entrega

Medios de pago

Cantidad

Medios de pago

Conoce más detalles

Versatile design allows the 1/4" hardened stop rod to be quickly and accurately positioned. Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy. Lever arm can be rotated out of the way for cutter clearance and accurately relocated for repeat setup. (loosening and retightening of screw is required) Large 1/2"-13 bolt used to rigidly attach lever arm to base. Base of unit is keyed to 5/8" T-slot in table. 5/8" T-nut included. **Will not fit bench top mills** PLEASE SCROLL DOWN FOR MORE DETAILS. ***

Edge Technology 16-000 Pro Mill Stop - Milling Workstop for 6" Vises, Repeat Setup with Rotating Arm for Total Clearance, Fast, Accurate Part Setup, Fits 5/8” T-Slot

Conoce más detalles

Edge Technology 58-000 - Tool Post Indicator Deluxe, 3‑Position OD/ID/Face, 0.0005" Indicator, Hole Stylus with Micro Bearings, Mounts in Lathe with AXA BXA CXA, Padded Case

Edge Technology 04-000 Pro Touch Off Gage – CNC Milling Machine Z Axis Tool Setter, 4" Offset, Large 2.2" Dial, Hardened Stainless Contact Face, High‑Accuracy 0.0002" Repeatability, Padded Case

Edge Technology 50-000 - 2 Position Vise Handle, Aluminum Speed Handle for 3/4" Hex Vise, Thumb Knob Lock, Fast Open and Close, Fits Manual and CNC Milling Machine

Edge Technology 08-000 Speedy Lathe Gage - Quick, Accurate Tool Height Setting for Engine Lathes, Spindle Axis Alignment, Compatible with 4 Jaw Chuck

Edge Technology 06-000 Mill Caddy - Compact Workspace Organizer for Vise Wrench, Hammer, and Air Nozzle – For Bridgeport style Milling machines

Edge Technology 27-000 Tailstock Alignment Bar – 12” Lathe Alignment Test Bar - Precision Ground Hardened Steel Ends - 0.0002" Accuracy, Aligns Tailstock to Headstock

Edge Technology 14-000 Vise Jaw Stop - Low Profile, CNC & Manual Milling Machine Workstop, Compact Design, Total Endmill Clearance

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots

Edge Technology 48-000 - Multi Axis Stop, Low Profile Workstop, Won’t Interfere with Endmill Paths, 5 Axis Mill Stop, Fits 5/8" T‑Slots in Manual & CNC Milling Machine

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots

Edge Technology 03-000 Pro Vise Stop - Low Profile CNC Milling Workstop for 6" Vises, Fast, Accurate Part Setup, Repeat Setup with Rotating Arm for Total Clearance

VMTW Band Clamp 12 pack for edge clamping, banding on shelving, cabinet edges, plywood edging, laminations

Edge Technology 04-000 Pro Touch Off Gage – CNC Milling Machine Z Axis Tool Setter, 4" Offset, Large 2.2" Dial, Hardened Stainless Contact Face, High‑Accuracy 0.0002" Repeatability, Padded Case

Edge Technology 27-000 Tailstock Alignment Bar – 12” Lathe Alignment Test Bar - Precision Ground Hardened Steel Ends - 0.0002" Accuracy, Aligns Tailstock to Headstock

Edge Technology 30-000 Chuck Stop Spider Set - Magnetic Spider, includes 10 Sets of Parallel Bars, 0.0002" Parallelism, Fits 3 Jaw Lathe Chucks that are 6” and Larger

Edge Technology 02-000 Pro Lathe Gage - Quick, Accurate Tool Height Setting for Engine Lathe, Spindle Axis Alignment, Boring Bar Compatible, Hands-Free Design

Edge Technology 03-000 Pro Vise Stop - Low Profile CNC Milling Workstop for 6" Vises, Fast, Accurate Part Setup, Repeat Setup with Rotating Arm for Total Clearance

Edge Technology 14-000 Vise Jaw Stop - Low Profile, CNC & Manual Milling Machine Workstop, Compact Design, Total Endmill Clearance

Edge Technology 01-000 Pro Tram System – Milling Machine Spindle Square Tramming Tool with Large Easy to Read 2.2" Dia Indicators, 0.001" Graduation, 1/2" Shank, Padded Case

Edge Technology 58-000 - Tool Post Indicator Deluxe, 3‑Position OD/ID/Face, 0.0005" Indicator, Hole Stylus with Micro Bearings, Mounts in Lathe with AXA BXA CXA, Padded Case

Edge Technology 42-000 Tool Post Indicator - Quick‑Mount Dial Indicator Holder for Lathe Tool Posts, Fast Precision Alignment for Turning, 0.0005" Graduation Indicator, Padded Case

Edge Technology 44-000 – Indicator Holder 3/8” Shank Mount, Proprietary Friction Technology for Smooth Consistent Resistance, Dovetail Indicator Mount

Edge Technology 43-000 – Indicator Holder Clamp Mount for Bridgeport Style Milling Machine, Proprietary Friction Technology for Smooth Consistent Resistance, Dovetail Indicator Mount

Edge Technology 49-000 - Parallel Separator, Parallel Keeper for 6" Vise, Strong Compression Springs, Keeps Parallels Firmly Against Vise Jaws, Fits Manual & CNC Milling Machine

Información útil

Centro de ayuda

Todo en un solo lugar

Comprá con tranquilidad

Edge Technology 16-000 Pro Mill Stop - Milling Workstop for 6" Vises, Repeat Setup with Rotating Arm for Total Clearance, Fast, Accurate Part Setup, Fits 5/8” T-Slot

Conoce más detalles

Productos Relacionados

Edge Technology 58-000 - Tool Post Indicator Deluxe, 3‑Position OD/ID/Face, 0.0005" Indicator, Hole Stylus with Micro Bearings, Mounts in Lathe with AXA BXA CXA, Padded Case

Edge Technology 04-000 Pro Touch Off Gage – CNC Milling Machine Z Axis Tool Setter, 4" Offset, Large 2.2" Dial, Hardened Stainless Contact Face, High‑Accuracy 0.0002" Repeatability, Padded Case

Edge Technology 50-000 - 2 Position Vise Handle, Aluminum Speed Handle for 3/4" Hex Vise, Thumb Knob Lock, Fast Open and Close, Fits Manual and CNC Milling Machine

Edge Technology 08-000 Speedy Lathe Gage - Quick, Accurate Tool Height Setting for Engine Lathes, Spindle Axis Alignment, Compatible with 4 Jaw Chuck

Edge Technology 06-000 Mill Caddy - Compact Workspace Organizer for Vise Wrench, Hammer, and Air Nozzle – For Bridgeport style Milling machines

Edge Technology 27-000 Tailstock Alignment Bar – 12” Lathe Alignment Test Bar - Precision Ground Hardened Steel Ends - 0.0002" Accuracy, Aligns Tailstock to Headstock

Edge Technology 14-000 Vise Jaw Stop - Low Profile, CNC & Manual Milling Machine Workstop, Compact Design, Total Endmill Clearance

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots

Edge Technology 48-000 - Multi Axis Stop, Low Profile Workstop, Won’t Interfere with Endmill Paths, 5 Axis Mill Stop, Fits 5/8" T‑Slots in Manual & CNC Milling Machine

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots

Edge Technology 03-000 Pro Vise Stop - Low Profile CNC Milling Workstop for 6" Vises, Fast, Accurate Part Setup, Repeat Setup with Rotating Arm for Total Clearance

VMTW Band Clamp 12 pack for edge clamping, banding on shelving, cabinet edges, plywood edging, laminations

Otros Productos

Edge Technology 04-000 Pro Touch Off Gage – CNC Milling Machine Z Axis Tool Setter, 4" Offset, Large 2.2" Dial, Hardened Stainless Contact Face, High‑Accuracy 0.0002" Repeatability, Padded Case

Edge Technology 27-000 Tailstock Alignment Bar – 12” Lathe Alignment Test Bar - Precision Ground Hardened Steel Ends - 0.0002" Accuracy, Aligns Tailstock to Headstock

Edge Technology 30-000 Chuck Stop Spider Set - Magnetic Spider, includes 10 Sets of Parallel Bars, 0.0002" Parallelism, Fits 3 Jaw Lathe Chucks that are 6” and Larger

Edge Technology 02-000 Pro Lathe Gage - Quick, Accurate Tool Height Setting for Engine Lathe, Spindle Axis Alignment, Boring Bar Compatible, Hands-Free Design

Edge Technology 03-000 Pro Vise Stop - Low Profile CNC Milling Workstop for 6" Vises, Fast, Accurate Part Setup, Repeat Setup with Rotating Arm for Total Clearance

Edge Technology 14-000 Vise Jaw Stop - Low Profile, CNC & Manual Milling Machine Workstop, Compact Design, Total Endmill Clearance

Edge Technology 01-000 Pro Tram System – Milling Machine Spindle Square Tramming Tool with Large Easy to Read 2.2" Dia Indicators, 0.001" Graduation, 1/2" Shank, Padded Case

Edge Technology 58-000 - Tool Post Indicator Deluxe, 3‑Position OD/ID/Face, 0.0005" Indicator, Hole Stylus with Micro Bearings, Mounts in Lathe with AXA BXA CXA, Padded Case

Edge Technology 42-000 Tool Post Indicator - Quick‑Mount Dial Indicator Holder for Lathe Tool Posts, Fast Precision Alignment for Turning, 0.0005" Graduation Indicator, Padded Case

Edge Technology 44-000 – Indicator Holder 3/8” Shank Mount, Proprietary Friction Technology for Smooth Consistent Resistance, Dovetail Indicator Mount

Edge Technology 43-000 – Indicator Holder Clamp Mount for Bridgeport Style Milling Machine, Proprietary Friction Technology for Smooth Consistent Resistance, Dovetail Indicator Mount

Edge Technology 49-000 - Parallel Separator, Parallel Keeper for 6" Vise, Strong Compression Springs, Keeps Parallels Firmly Against Vise Jaws, Fits Manual & CNC Milling Machine

Compra protegida

¿Cómo comprar?

Garantía de entrega

¿Cómo solicitar una devolución?

Los productos sin devolución son:

¿Cómo comprar?

Hacemos todo por ti

Tarjetas de Débito y Crédito

Pagos a través de PayPal

Tienes garantía de entrega

¡Suscribite y hacé que todo llegue con ofertas!