SKU/Artículo: AMZ-B01I4HOEZ2

HiLetgo

HiLetgo 2pcs ICL8038 Monolithic Function Signal Generator Module DIY Kit Sine Square Triangle

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
0.30 kg
Devolución:
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • Description: ICL8038 pin functions: Pin 1, Pin 12: sine waveform adjusting terminal; Pin 2: sine wave output; Pin 3: triangle wave output; Pin 4, Pin 5: the frequency and duty cycle (or waveform asymmetry) adjustment; Pin 6: V +, the positive power supply; Pin 7: Frequency Offset; Pin 8: Frequency adjustment input terminal; Pin 9: square wave output. This is an open collector output terminal, work should take a load resistor to the corresponding positive power supply terminal from the pin, to get a TTL-compatible square-wave output, the load resistance must be connected to + 5V power supply; Pin 10: timing capacitor terminal; Pin 11: V-, negative power supply terminal or the ground. When Use positive and negative power supply, Pin 11 to the negative supply, the output waveform are symmetrical with respect to 0 V; When use a single positive power supply, Pin 11 grounded, the output waveform is unipolar, uniform voltage is + VCC / 2; Pin 13 and Pin 14: Empty Pin. The kit is designed for a frequency range is 50-5KHz, two bands with using a switch S to switch, RP1 is the frequency adjustment, RP2 is the duty cycle adjustment, RP3 is a sine wave distortion adjustment. Circuit uses 12V single power supply, input from the X1; X2, X3 is a waveform output side, you can use oscilloscope to observe three output waveforms. Model: ICL8038 Input: 12V DC Frequency range: 50-5KHz, Package Included: 1 * ICL8038 Function Signal Generator DIY KIT Note: Please contact us if you need the Schematic.

Producto prohibido

Este producto no está disponible

Conoce más detalles

ICL8038 Monolithic Function Signal Generator Module DIY Kit Frequency range: 50-5KHz, Input: 12V DC Model: ICL8038 uniform voltage is + VCC / 2