Garantía de entrega
Ele eleoption
Hengwei Hot Cross Hatch Adhesion Tester Instruction Cross-Cut Tester Kit USG Adhesive ForceMeasuring Instrument 1mm 2mm Adhesion Tester Hundred Grid Knife Suitable for GB/T9286-98,BS3900 E6/ASTM D3359
Disponibilidad
En stock
En stock
Peso con empaque
0.20 kg
0.20 kg
Devolución
No
No
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Sobre este producto
- 1.The instrument is mainly suitable for organic coating adhesion assay Hatch.
- 2. Applies not only to the laboratory,the construction site can also be used under various conditions.
- 3. Working principle and scope
- 4. The instrument is a certain specification tool that will make the coating lattice graphics cut and penetrate,hatch completed by six graphic classification, assess the effect of the coating adhesion separated from the substrate.
- 5.Multi-blade cutter spacing are: 1+0.01mm, 2+0.01mm. 6.Multi-blade cutter addendum straightness were: ≯0.003mm≯0.006mm. 7.Multi-blade cutter working tooth tip width: ≯0.05mm.
$188,47
60% OFF
$75,39
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
$188,47
60% OFF
$75,39
Obtén 2 meses de gracia con Pacificard
Envío gratis
Llega en 16 a 26 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
Conoce más detalles
Description: This instrument and is designed and manufactured according to the standard of ISO2409-1992.Applicable to GB /T9286-98, BS 3900E6/ASTM D3359. The instrument draw the grid of a certain size by a certain specification of the tools by using the uniform force,cut and penetrate the coating to be a grid lattice graphics, to evaluate the adhesion of coating on the substrate through the assessment of the full extent of the grid. Technical Specification: 1.Multi-blade cutter spacing are: 1+0.01mm, 2+0.01mm. 2.Multi-blade cutter addendum straightness were: /0.003mm≯0.006mm. 3.Multi-blade cutter working tooth tip width: ≯0.05mm. Instruction: 1.The specimen must be prepared according to ISOR1514 and ISO2828 requirements. 2.The test piece is placed on the tablet hardness sufficient. 3. Handheld Hatch handle, so multi-blade cutter perpendicular to the specimen plane. 4.With uniform pressure, steady approach does not vibrate and 20-50mm / S cutting speed cutting program. 5.The specimen is rotated 90 degrees on the cutting stroke cuts repeat the above operation, so as to form a lattice graphics. 6.With a soft bristle brush on both sides of the diagonal lattice pattern gently back 5 times, 5 times forward brush specimens. 7.The test at least at three different locations on the test piece is completed,if the test results of three different positions, the experiment should be repeated at more than three positions, all while recording the results. To replace the multi-blade cutter, use a screwdriver blade Loosen the two screws, put the knives, knife blade attached to the handle side of the site, and tighten the screws.
