0

Recibe aproximadamente entre 15 y 30 días hábiles

Pasa el mouse para ver la imagen ampliada

Myoware

MyoWare 2.0 Cable Shield - Non-Wearable Project Connector - On-Board snap connectors - 3.5mm TRS Jack Attach a Traditional Three-Electrode Sensor Cable - Board Dimensions: 1.48in x 1.41in

2 Calificaciones

Disponibilidad: En stock

Marca: Myoware

Peso con empaque: 0.300 kg

Producto con devolución

Producto de: Amazon

MyoWare 2.0 Muscle Sensor Form Factor: 3x Male Snap Pins (Input Electrodes): Easily attach to other MyoWare boards; Snap to bottom side of Muscle Sensor Board
1x 3.5 mm TRS Connector: Attach traditional 3 electrode sensor cable; Test and use muscle sensor without attaching board to a person
Board Dimensions: 37.57 mm x 35.90 mm (1.48 in x 1.41 in); Note: Accessory only; MyoWare 2.0 Muscle Sensor will need to be purchased separately
Use with non-wearable projects: Projects housed in an enclosure or that target muscles that are too small or situated such that the on-board electrode sockets would not be suitable
Note: MyoWare and the Cable Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals

Ver más

SKU: B09VYDTKW8

Ver Calificaciones

Precio: U$S 15.30 S/ 57

Ahorras: U$S 7.50 (50%) S/ 28 (50%)

U$S 7.80

S/ 29

Este producto tiene Garantía de Entrega

Agrega el producto al carrito para conocer los costos de envío
Recibí este producto de 5 a 10 días hábiles seleccionando envío
Producto sin impuestos en tu país

S/80 OFF con BBVA o S/60 OFF con cupón CYBERWOW

Hasta 12 cuotas sin intereses con BCP y BBVA | 6 x con Diners

Este producto viaja > USA > Tus Manos

Más detalles del producto

The MyoWare 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away from the board; this is where the MyoWare 2.0 Cable Shield comes in. The shield includes a 3.5mm TRS jack where you can attach a traditional three-electrode sensor cable, allowing you to test and use the muscle sensor without actually attaching the board to your person.The MyoWare 2.0 Cable Shield is also equipped with snap connectors on the board so you can easily stack it. Unlike the other shields in the MyoWare 2.0 ecosystem, this board snaps to the bottom side of the MyoWare 2.0 Muscle Sensor. Use this shield for non-wearable projects that are housed in an enclosure or that target muscles that are too small or situated such that the on-board electrode sockets would not be suitable.Note: MyoWare and the Cable Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.The MyoWare 2.0 ecosystem consists of shields that easily interface with the MyoWare 2.0 Muscle Sensor, which is a low-cost, compatible with Arduino, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.This product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sale goes back to them for product support and continued development.

Más información para tu compra de MyoWare 2.0 Cable Shield -...

abrir

¿Cuál es la valoración promedio de MyoWare 2.0 Cable Shield -...?

La valoración promedio de MyoWare 2.0 Cable Shield -... es 4 (basado en 2 reviews).

abrir

¿MyoWare 2.0 Cable Shield -... tiene devolución?

Si, usted puede devolver el producto a nuestras oficinas de Miami (USA). Para ello se debe solicitar la devolución en su cuenta de Tiendamia dentro de los primeros 7 días de haber recibido el paquete. Los costos de devolución corren por cuenta del cliente. Más información en Políticas de devolución

abrir

¿A qué tienda pertenece este producto?

MyoWare 2.0 Cable Shield -... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de MyoWare 2.0 Cable Shield -...?

Los tiempos de envió pueden variar según el producto. Recibí MyoWare 2.0 Cable Shield -... en tu casa en un tiempo de entre 5 y 10 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Perú. Si tu pedido no llega luego de 60 días de realizada la orden, te devolvemos tu dinero. Tener en cuenta que la garantía de entrega no aplica en caso de que el producto quede retenido en Aduana por razones ajenas a tiendamia

   
  Loading...