0

Recibe aproximadamente entre 15 y 30 días hábiles

Pasa el mouse para ver la imagen ampliada

Zircon

Zircon StudSensor e50 Electronic Wall Scanner / Edge Finding Stud Finder / Live AC WireWarning Detection

1973 Calificaciones

Disponibilidad: Fuera de stock

Marca: Zircon

Peso con empaque: 0.388 kg

Producto sin devolución

Producto de: Amazon

The Zircon SS e50 electronic stud scanner detects the edges of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards while mounting a TV, hanging cabinets, installing garage shelving and more
StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes.Operating Temperature:20° to 105°F (-7° to 41°C)
Patented "Over the Stud" Indicator and SpotLite Pointing System ensure the e50 provides trustworthy results while the ergonomic grip design allows for comfortable use regardless of hand size
One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance

Ver más

SKU: B01HTFHOEI

Ver Calificaciones

Este producto viaja > USA > Tus Manos

Más detalles del producto

The Zircon StudSensor e50 is an electronic edge finding stud finder. The e50's body design reduces normal scanning errors and can be comfortably held in either hand at any angle while the rubber over molded grip also provides a secure hold. The SS e50 easily locates the edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. In StudScan mode, the SSe50 locates the edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, an arrow-shaped SpotLite Pointer will illuminate and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor e50, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

Más información para tu compra de Zircon StudSensor e50 Elect...

abrir

¿Cuál es la valoración promedio de Zircon StudSensor e50 Elect...?

La valoración promedio de Zircon StudSensor e50 Elect... es 4 (basado en 1973 reviews).

abrir

¿A qué tienda pertenece este producto?

Zircon StudSensor e50 Elect... pertenece al catálogo de Amazon

abrir

¿Cuánto demora el envío de Zircon StudSensor e50 Elect...?

Los tiempos de envió pueden variar según el producto. Recibí Zircon StudSensor e50 Elect... en tu casa en un tiempo de más de 26 dias.

abrir

¿Este producto tiene garantía de entrega?

Todas las órdenes tienen garantía de entrega en Perú. Si tu pedido no llega luego de 60 días de realizada la orden, te devolvemos tu dinero. Tener en cuenta que la garantía de entrega no aplica en caso de que el producto quede retenido en Aduana por razones ajenas a tiendamia

 
 
  Loading...