WALFRONT NPN Output Capacitive Liquid Level Sensor Contactless Water Level Sensor with Buzzer and Indicator Light IP65 NPN Output
En stock
1.31 kg
No
Nuevo
Amazon
USA
- Spec: Item Type: Contactless Water Level Sensor Material: ABS Operating Temperature: -5 to 105℃ Water Proof Rating: IP65 Operating Humidity: 5% to 100% Response Time: 500Ms Sensing Method: Capacitive Power Protection: Polarity protection Wiring Terminal Definition: Brown (power supply positive), blue (power supply negative), black (signal line), white (mode line). White line floating for NPN normally open; White line short connected to blue line for NPN normally closed Sensor Sensitivity Adjustment: 1. Counterclockwise increases sensitivity; Clockwise decreases sensitivity. 2. The sensor can sense human hands, so it is recommended to install the sensor in a fixed position for adjustment to avoid human hands being within the sensing range. Measurement Output Voltage: 1. The sensor outputs NPN normally open output, when no load is connected and only a multimeter is used for measurement, the high level value is virtual and has no practical significance. 2. The sensor should be connected to a load of less than 0.2A (indicator light, small relay, pull up resistor, optocoupler, etc.) to measure the output end with a multimeter, data is only valid at this time. High Level Issues When Connecting to Microcontroller or PLC: For example, a sensor that supplies 12V power needs to be connected to a 5V microcontroller, the positive pole of 12V should be connected to brown line, the negative pole of 12V should be connected to blue line, the black line should be connected to 10K resistor, when the voltage is pulled up to 5V, the black line is at a high low voltage level of 5V. PackageList: 1 x Contactless Water Level Sensor 1 x Note: The tested liquid must be conductive, the touch surface pipeline is non metallic and can be widely used.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Contactless Detection: This liquid level sensor adopts advanced signal processing technology and high speed signal processing chip, which breaks through the influence of container wall thickness, can achieve liquid level detection in closed containers without touch. IP65 Rating: The liquid level sensor adopts black sealant to tightly seal the back, featuring IP65 rating, preventing debris from entering the interior and causing damage. Premium Materials: The casing is made of ABS plastic, which is insulated, fire retardant, and lasting. The standard wire is thick and sturdy, water proof, oil proof, and anti aging, with well conductivity. Versatile Use: This contactless water level sensor can directly drive loads such as relays, signal lights, reminders, and PLCs, with adjustable sensing sensitivity. High Performance: This sensor has high stability, high sensitivity, strong anti interference ability, and is not affected by external electromagnetic interference, which has been specially treated for power frequency interference and common mode interference.