Garantía de entrega
SKU/Artículo: AMZ-B0DPM5F1BS
EC Buying
EC Buying ESP32-C6-DevKitC-1-N8 Development Board ESP32 WiFi Development Board Module ESP32-C6-WROOM-1 32-bit 8MB SPI Flash ESP32-C6-WROOM Module Supports Wi-Fi BLE
Detalles del producto
Disponibilidad:
En stock
En stock
Peso con empaque:
0.30 kg
0.30 kg
Devolución:
Sí
Sí
Condición
Nuevo
Nuevo
Producto de:
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- ESP32-C6-WROOM-1: ESP32-C6-WROOM-1 is a universal module that supports Wi Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread). This module is equipped with ESP32-C6 chip, PCB board mounted antenna, and 8 MB SPI flash. Pin Header: All available GPIO pins (except for the SPI bus of Flash) have been led out to the pin header of the development board. 5V to 3.3V LDO: power converter, input 5V, output 3.3V. 3.3 V Power On LED: This indicator light lights up when the development board is connected to a USB power source. USB to UART Bridge: A single-chip USB to UART bridge that can provide transmission rates of up to 3 Mbps. ESP32-C6 USB Type-C Port: The USB Type-C interface of the ESP32-C6 chip supports USB 2.0 full speed mode, with a maximum data transfer rate of 12 Mbps (note that this interface does not support 480 Mbps high-speed transfer mode). Boot Button: Download button. Press and hold the Boot key while pressing the Reset key to enter the "firmware download" mode and download firmware through the serial port. Reset Button: Reset button. USB Type-C to UART Port: can be used as a power interface for development boards or as a communication interface, communicating with ESP32-C6 chips through an onboard USB to UART bridge. RGB LED: an addressable RGB light-emitting diode driven by GPO8. J5: Used for measuring current.
S/ 82.12
60% OFF
S/ 32.85
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
S/ 82.12
60% OFF
S/ 32.85
Hasta 6 cuotas sin intereses con BCP, BBVA y Diners
Llega en 5 a 10 días hábiles
con envío
Tienes garantía de entrega
Conoce más detalles
ESP32-C6-DevKitC-1 is an entry-level development board that uses a universal module ESP32-C6-WROOM-1 (U) with 8 MB SPI flash. This development board has complete Wi Fi, BLE Pin Header: All available GPIO pins (except for the SPI bus of Flash) have been led out to the pin header of the development board. 5V to 3.3V LDO: power converter, input 5V, output 3.3V 3.3 V Power On LED: This indicator light lights up when the development board is connected to a USB power source The USB Type-C interface of ESP32-C6 chip supports USB 2.0 full speed mode, with a maximum data transfer rate of 12 Mbps (note that this interface does not support 480 Mbps high-speed transfer mode)
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Saber más.
Visa
Mastercard
American Express
