RETROSUN 433.92MHz Rolling Code Gate Opener Remote, Wireless Learning Code Remote Controller Cloning Duplicator Remote Control Keychain 4 Button Garage Door Opener Remote for Electric Garage Door Car

Conoce más detalles

【Compatible IC Chip】This product can copy the IC model: 2260 (as, PT2260, SC2260, HS2260 LX2260, HX2260); 2262 (as, PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240 LX2241 SCL2240), CS5211, 1527( EV1527, HS1527, HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527), SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600,HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630 ULN2003, etc. 【4 Buttons Design】There are 4 buttons one each of the remote control key fobs, which can help you control the devices precisely. 【 Rolling code and Learning Code Function】Compatible with 433.92 MHz Gate 0peners. This is a fixed and roling frequency remote cloner (433.92mhz) for copying 99.99% common fixed and learning code remote controls. 【Warm Note】With this remote duplicator, you can clone all 433.92MHz fixed code key fobs. Some remotes that use this frequency are listed above. If your copy fails under correct operation, you may want to check if your device has the above chip. 【How to replace the battery is as follows:】1) Unscrew the 3 screws on the back of the remote control with a cross wrench. 2) Unlock the back cover. 3)Remove the plate from the inside of the back cover with a screwdriver. 4)Push the battery with a screwdriver and let it slide out of the battery holder. 5)After replacing the battery, put the plate back into the back cover. 6)Install the front cover to the back cover. 7)Reinsert the 3 screws.