3.52inch E-Paper Display Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Jetson Nano/STM32, 360x240 Pixel E-Ink Display, Red/Black/White, SPI Interface with Driver Board
En stock
0.30 kg
No
Nuevo
Amazon
USA
- 1. This is 3.52inch e-Paper display (B) with Driver Board, e-ink display, 360x240 pixels, Red/Black/White Three Display Colors, SPI Interface. 2. with RPI 40PIN GPIO Header, Compatible with Raspberry Pi series boards ( Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2,etc.), Jetson Nano, RDKX3, STM32,etc. 3. Comes with e-Paper driver board, onboard SPI Control Interface, For Use With Raspberry Pi / Ar-dui-no/ STM32,etc. 4. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. 5. Onboard voltage translator, compatible with 3.3V / 5V MCUs. 6. Comes with online development resources and manual (driver board circuit diagram, examples forPi / Jetson Nano / RDK X3 /Ar-dui-no/ STM32), Please check: n9.cl/7kmhrm Specifications Operating Voltage: Raw display: 3.3V Operating Voltage: with driver board: 3.3V/5V Display Color: Red/Black/White Resolution: 360 x 240 pixels Communication Interface: 3-wire SPI, 4-wire SPI Dot Pitch: 0.207 x 0.207 (mm) Grayscale: 2 Refresh Time: 16s Viewing Angle :>170° Refresh Power: <25mW Sleep Current : <0.01uA (almost none) Outline Dimensions: Raw display: 84.70 x 54.41 x 0.85 (mm) ; with driver board:86.50 x 57.00 (mm) Display Size: 74.51 x 49.67 (mm) Package Content 3.52inch e-Paper HAT (B) x1 PH2.0 8-P cable x1 Screws pack x1
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
This is 3.52inch e-Paper display (B) with Driver Board, e-ink display, 360x240 pixels, Red/Black/White Three Display Colors, SPI Interface. with RPI 40PIN GPIO Header, Compatible with Raspberry Pi series boards ( Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2,etc.), Jetson Nano, RDKX3, STM32,etc. Comes with e-Paper driver board, onboard SPI Control Interface, For Use With Raspberry Pi / Ar-dui-no/ STM32,etc. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3.3V / 5V MCUs. Comes with online development resources and manual (driver board circuit diagram, examples forPi / Jetson Nano / RDK X3 /Ar-dui-no/ STM32), Please check: n9.cl/7kmhrm