MPPT Solar Controller Backlight LCD Display Clock Solar Panel Regulator 100V7 Working Modes 12V 24V 36V 48V Adaptive Dual USB 5V Charging Ports 60A 80A 100A 200A (200A)
Size:
200A
En stock
1.20 kg
No
Nuevo
Amazon
USA
- Spec: Item Type: MPPT Solar Controller Material: ABS, Aluminum Weight: Approx. 740g/26.1oz Voltage: 12V 24V 36V 48V Adaptive Rated current: 60A, 80A, 100A, 200A Maximum PV Voltage: 100V How to Use: 1. Charging mode: under no circumstances shall it be discharged. 2. Light control mode: when the controller detects night, it will delay for ten minutes and then start discharging; when it detects day, it will delay for ten minutes and then stop discharging. 3. Light and delay control mode: when the controller detects night, it will delay ten minutes and then start discharging and count down (if the timer stops to zero), the discharging will stop. The maximum delay time is 23:59. 4. Universal control mode: always keep discharging in case of no fault. 5. Manual control mode: Use ▼ to discharge or not. 6. Timing control mode: timed to turn on or off the discharge. 7. Test mode: same as light and delay control mode, but only lose ten minutes delay. 8. Controller still discharges under low voltage guard. ▼ lasts for 5 seconds, discharge continues to output. PackageList: 1 x MPPT Solar Controller 1 x Solar Angle Guide Note: 1. This controller is 12V 24V 36V 48V auto adaptive, when installing for the first time, please make sure the battery has enough voltage so that the controller can recognize the correct battery type. 2. Install the controller as close to the battery as possible to avoid voltage drop caused by long wires, which will affect the normal voltage judgment. 3. This controller is suitable for all kinds of batteries (including open, sealed, gel, etc.) lithium batteries (lithium batteries need to manually adjust the overcharge voltage) Do not use other batteries (NiMH batteries, etc.). 4. This controller can only use photovoltaic panels as a charging source, please do not use DC
Conoce más detalles
ADVANCED MPPT TECHNOLOGY: MPPT solar controller, using advanced MPPT maximum power point tracking technology algorithm, automatic recognition of 12V 24V 36V 48V; It can quickly track the maximum power point of the photovoltaic array in any environment, with a tracking efficiency of no less than 99.5%. Significantly improved the energy utilization efficiency of solar energy systems. MULTIFUNCTIONAL DESIGN: MPPT solar charging controller, with backlight display and clock display multifunctional LCD, 7 working modes, charging mode, light control mode, light and delay control mode, universal control mode, manual control mode, timer control mode. VOLTAGE GUARD: The solar panel controller has voltage for MPPT solar controllers, including battery overvoltage and overcurrent , power failure , overcharge , deep discharge , reverse connection , and overheating temperature . USER FRIENDLY DESIGN: The LCD display of the solar panel controller is designed to dynamically display the operating data and working status of the device. Controller parameter display (working mode, battery voltage, photovoltaic charging current, battery discharging current, product operating temperature, delay time). MULTIPLE BATTERY CHARGING OPTION: The MPPT solar charging controller has multiple battery charging options and is compatible with Seal, GEL, Flood, and LifePO4 battery charging. Dual USB 5V charging ports.