Garantía de entrega
SKU/Artículo: AMZ-B0D879RMC7
UeeKKoo
2.13inch E-Ink Display HAT V4 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Black/White Two Display Colors, Support Partial Refresh
Color:
1x 2.13epaper
Detalles del producto
Disponibilidad:
En stock
En stock
Peso con empaque:
0.30 kg
0.30 kg
Devolución:
Sí
Sí
Condición
Nuevo
Nuevo
Producto de:
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- Overview This is 2.13inch E-Ink display HAT for RPi series boards, Jetson Nano. 250x122 resolution, black and white Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features Standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards (includes RPi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W,etc. ) and compatible with Jetson Nano. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Ardui/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with Online Development Resources and Manual: bit.ly/3hZh77i Specifications Operating Voltage: 3.3V/5V Resolution: 250 x 122 pixels Interface: 3-wire SPI, 4-wire SPI Display Color: black, white Grey Scale: 2 Partial Refresh Time: 0.3s Full Refresh Time: 2s Refresh Power: 26.4mW(typ.) Standby Power: <0.017mW Viewing Angle: >170° Dot Pitch: 0.194 x 0.194 Display Size: 48.55 x 23.71mm Outline Dimension: 65mm x 30.2mm Onboard SPI control interface SYMBOL--DESCRIPTION VCC-- 3.3V/5V GND--Ground NC--NC DIN--SPI MOSI pin CLK--SPI SCK pin CS--SPI chip selection, low active DC--Data/Command selection (high for data, low for command) RST--External reset, low active BUSY--Busy status output, high active PACKAGE CONTENT 2.13inch e-Paper HAT x1 RPi screws pack (2pcs) x1 PH2.0 20cm x1
S/ 132.64
44% OFF
S/ 73.69
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
S/ 132.64
44% OFF
S/ 73.69
Hasta 6 cuotas sin intereses con BCP, BBVA y Diners
Llega en 5 a 10 días hábiles
con envío
Tienes garantía de entrega
Conoce más detalles
This is 2.13inch E-Ink Display HAT with RPi 40PIN GPIO extension header, compatible with Raspberry Pi series boards (includes RPi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W,etc. ) and compatible with Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. SPI interface, for connecting with controller boards like Ardui/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. IMPORTANT Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped. Comes with online development resources and manual (driver board circuit diagram, examples ): bit.ly/3hZh77i
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Saber más.
Visa
Mastercard
American Express
