SKU/Artículo: AMZ-B0D7M2VGCC

AITIAO

AITIAO 6PCS USB Humidifieration Atomization Disc Spray Humidifier Module 5V Mirco USB Humidifier Atomization Drive Circuit Board with Timing Switchfor DIY Home

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
6.15 kg
Devolución:
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • Humidifier Module Parameter:Rated Voltage: DC 5VRated Current: 300mAPower Type: Micro USB socketHumidifier Interface: PH2.0 terminalMaterial: 1.2mm FR-4PCB Size: 35*19mm, Weight: 4gFrequency: 108KHz+3Power: 1.5-2WAtomization amount: Around 40-50ml/hWork Temperature: 0℃~85℃Work Humidity: 10%~90%RHHumidifier Cotton Swab Size: 100*10mmBlack Bracket Size: 38*24mm, Weight: 4gHow to Use Humidifier Module:1.Charge it with an USB power cord.2. Place the atomizer on a shallow surface or sponge in water. Note that the welding surface of the atomizer plate faces upwards.3. Press the key to start it. Then Enjoy Your Soft Moist Air.4. Application: USB humidifier, Perfume atomizer, Aromatherapy atomizer, Auto partsNOTE:1. Do not puncture the atomizer.2. Can not run empty.3. Do not use fast chargers.4. No change circuit.5. The circuit board must not be damp.6. All steel sides draw water downward.7. Rated power input.Package Inlcuding:6 X Atomization Module6 X Microporous Atomizing Film6 X Humidifier Cotton Swab6 X Black Plastic Bracket
S/ 96.31
55% OFF
S/ 43.77

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

S/ 96.31
55% OFF
S/ 43.77

Hasta 6 cuotas sin intereses con BCP, BBVA y Diners

Llega en 10 a 15 días hábiles
con envío
Tienes garantía de entrega

Conoce más detalles

Wide Application: Ultrasonic mist maker is a humidifier DIY kit, which is widely used in atomization equipment such as USB humidifier, perfume atomizer, aromatherapy atomizer, etc. The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward, All steel sheet surface is the suction surface on the back, installed downwards. The red wire is positive and the black wire is negative. Two spray modes: press the switch for the first time is continuous spray mode: LED light is always on, always spray, spray 4 hours after the automatic shutdown protection. Press the switch for the second time is indirect spray mode: LED flashes, spray 10 seconds, stop spraying for 5 seconds, and so on, spray 12 hours after the automatic shutdown protection. Press the switch for the third time to turn off the machine. High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate, spray variety, timed shutdown.