SKU/Artículo: AMZ-B087D3XSRM

Prop and Scenery Lights, LLC

Prop and Scenery Lights Blacklight 3 Head Micro Special Effects Kit 12v 9v Dc for Props Fluorescent Paints Pigments Fabric Plastics Theatrical Costumes

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
0.30 kg
Devolución:
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • This kit consists of three Micro Effects Lights, Blacklight with 405nm light output in a narrow beam pattern, a 3-way Pigtail Connector Splitter, and a 12-volt battery holder. This unit is a blacklight source in the UVA ultraviolet region at 405nm for building props, scenery and costumes. The LED blacklights can operate from a 12 volts DC or 9 volt DC power supply. Power at 12V DC is 84ma nominal current, 1.0 watts. The kit can also operates from 8 AA batteries, and runs for more than 18 hours (24 hours typical) on new alkaline batteries (not included). The kit may also be operated from 9V by unsnapping the 9V battery clip from the top of the 8 AA battery holder. When operated from a new 9V alkaline battery, the operating time can be expected to be about 3 hours typical. The effective range of illumination of fluorescent materials in dark settings is typically 6 inches to 6 feet. Best range is achieved when operating from 12 volts DC. Uses include building of props and scenery where a small black light source is needed. The Micro Effects Light heads are 1.42 inch nominal in length and 0.48 inch nominal in diameter. Batteries are not included, power supply not included. Applications to light: Fluorescent glow Paints Diorama fluorescent scenery UV glow inks for art Blacklight inks for hand stamp Fluorescent theatrical costume fabric Acrylic fluorescent plastics Fluorescent glow pigments Blacklight art and posters
S/ 152.28
31% OFF
S/ 105.01

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

S/ 152.28
31% OFF
S/ 105.01

Hasta 6 cuotas sin intereses con BCP, BBVA y Diners

Llega en 5 a 10 días hábiles
con envío
Tienes garantía de entrega

Conoce más detalles

3 head miniature black light LED each of 3 light heads has an overall length of six inches from the 3-way cable splitter Small 405nm spotlight provides glow to fluorescent paints and materials in dark settings. The light itself has low visiblity. Operates from 12 volt DC power supply or 8 AA batteries for 12 volts DC, or 9V battery operation The 3-way cable splitter and lights use 2.1mmm x 5.5mm size DC barrel connectors, with center positive polarity The overall length of the of the entire assembly is 24 inch. The entire length of the 3-way splitter and lights is 14 inch