waveshare Three Color 2.13inch E-Ink Display HAT (B), 212x104 Resolution 3.3V/5V Red Black White E-Paper Display Screen for Raspberry Zero/Zero W/Zero WH/2B/3B/3B+ SPI Interface,Full Refresh
Color:
2.13inch E-Ink display HAT (B)
En stock
0.30 kg
Sí
Nuevo
Amazon
USA
- 212x104, 2.13inch E-Ink display HAT for Raspberry Pi, three-color, SPI interfaceOverviewThis is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.2.13inch e-Paper HAT (B) FeaturesNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingCompatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUsComes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)2.13inch e-Paper HAT (B) SpecificationsOperating voltage: 3.3V/5VInterface: 3-wire SPI, 4-wire SPIOutline dimension: 65mm × 30.2mmDisplay size: 23.71mm × 48.55mmDot pitch: 0.229 × 0.228Resolution: 212 × 104Display color: red, black, whiteGrey level: 2Full refresh time: 15sRefresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170°Package Content2.13inch e-Paper HAT (B) x1RPi screws pack (2pcs) x1PH2.0 20cm 8Pin x1 Note:Original from Waveshare, and more resources you may need , please contact us via Amazon message firstly to get.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ No backlight, keeps displaying last content for a long time even when power down Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/STM32)