Bewinner ENC28J60 Ethernet LAN Network Module - Specially Design for Zero/W - Easy to Assemble, Easy to Setup - Allows for Zero to Access The Network Smoothly
En stock
0.30 kg
Sí
Nuevo
Amazon
USA
- Features: Due to the Linux system for Zero, the Pi Zero without NIC is inconvenient. However, most of operations are based on linux's command line via ssh service, so a Network is required. The Pi zero Enc28j60 is a simple Network module for zero. It allows for zero to access the network smoothly, and it is easy to do system updates and software installation operations. Easy to assemble, easy to setup, official OS overlay support, stable and fast. Specifications: Compatibility: pi0 Size: 6.5*3cm/2.5*1.1in Weight: 19g(approx.) How to configure it: 1. Install the NIC module into for . 2. Connect the network cable to ensure that your router supports DHCP and works well. 3. Burn the Raspbian image to TF card. 4. Edit the /boot/config.txt file by your favorite editor such as "nano" or ".tiny", and add the following parameter: dtoverlay=enc28j60 Then save the exit and reboot for NOTE: The module is tested only in raspbian environments. How to check if network works well: Open a terminal and typing this command: ifconfig Package Includes: 1x Enc28j60 Network Module
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Due to the Linux system for Zero, the Pi Zero without NIC is inconvenient. However, most of operations are based on linux's command line via ssh service, so a Network is required. The Pi zero Enc28j60 is a simple Network module for zero. It allows for zero to access the network smoothly, and it is easy to do system updates and software installation operations. Easy to assemble, easy to setup, official OS overlay support, stable and fast.