Garantía de entrega
SKU/Artículo: AMZ-B07G84FG4J
YakAttack
YakAttack MightyMount Switch | Universal Deck Mount Adapter for Track Accessories | Fits Scotty, RAM, Cannon Patterns | LockNLoad Compatible | Yak Attack USA-Made
Detalles del producto
Disponibilidad:
En stock
En stock
Peso con empaque:
0.30 kg
0.30 kg
Devolución:
Sí
Sí
Condición
Nuevo
Nuevo
Producto de:
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- With an identical hole pattern as old school deck mounts this mount can be used to switch to a deck mount that accommodates modern track accessories without the need to drill more holes. Compatible with the YakAttack LockNLoad™ mounting system and with other MightyBolt accessories. For kayaks with pre-threaded inserts, additional hardware may be required. Made in the USA Covered by our Built for Life Guarantee SKU: MMSW Instructions for Inflatable Kayaks: 1. Locate the red bag of hardware containing nuts, washers, and LONG screws and discard them. They will not be used for inflatable kayak installs. 2. Position the MightyMount Switch on your YakAttack SwitchPad or other inflatable mounts. 2. Locate the SHORT 1/4-20 x 5/8" long stainless screws in the bag labeled, “Hardware for Inflatable Installs.” 3. Put a dab of Loctite on the threads and insert a SHORT screw into each hole of the MightyMount Switch. 4. Hand tighten with a Phillips Screwdriver until snug. Repeat steps 3 and 4 for the rest of the hardware. 5. After all screws are installed, fully tighten, being careful not to over tighten. Instructions for Rotomolded and ABS Kayaks: 1. Locate the Hardware for Deck Mount Installs 2. Position the MightyMount Switch on the surface where you want to install it. 3. Using a hole in the MightyMount Switch as a guide, drill the first hole using a 17/64” drill bit. 4. Drop a LONG 1/4‐20 screw through the MightyMount Switch and into the drilled hole. This will prevent the MightyMount Switch from sliding around as other holes are drilled. 5. Repeat steps 2 and 3 for the rest of the holes. 6. Once all holes are drilled, remove all screws. 7. Apply marine sealant as desired into hole and/or on screw threads. 8. Install first screw with washer and nut on inside of hull, but do not fully tighten. 9. Repeat steps 6 and 7 for remainder of screws. 10. After all screws are installed, fully tighten, being careful not to over tighten. With an identical hole pattern as old school deck mounts this mount can be used to switch to a deck mount that accommodates modern track accessories without the need to drill more holes. Compatible with the YakAttack LockNLoad™ mounting system and with other MightyBolt accessories. For kayaks with pre-threaded inserts, additional hardware may be required. Instructions for Inflatable Kayaks: 1. Locate the red bag of hardware containing nuts, washers, and LONG screws and discard them. They will not be used for inflatable kayak installs. 2. Position the MightyMount Switch on your YakAttack SwitchPad or other inflatable mounts. 2. Locate the SHORT 1/4-20 x 5/8" long stainless screws in the bag labeled, “Hardware for Inflatable Installs.” 3. Put a dab of Loctite on the threads and insert a SHORT screw into each hole of the MightyMount Switch. 4. Hand tighten with a Phillips Screwdriver until snug. Repeat steps 3 and 4 for the rest of the hardware. 5. After all screws are installed, fully tighten, being careful not to over tighten. Instructions for Rotomolded and ABS Kayaks: 1. Locate the Hardware for Deck Mount Installs 2. Position the MightyMount Switch on the surface where you want to install it. 3. Using a hole in the MightyMount Switch as a guide, drill the first hole using a 17/64” drill bit. 4. Drop a LONG 1/4‐20 screw through the MightyMount Switch and into the drilled hole. This will prevent the MightyMount Switch from sliding around as other holes are drilled. 5. Repeat steps 2 and 3 for the rest of the holes. 6. Once all holes are drilled, remove all screws. 7. Apply marine sealant as desired into hole and/or on screw threads. 8. Install first screw with washer and nut on inside of hull, but do not fully tighten. 9. Repeat steps 6 and 7 for remainder of screws. 10. After all screws are installed, fully tighten, being careful not to over tighten.
S/ 157.24
60% OFF
S/ 62.89
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
S/ 157.24
60% OFF
S/ 62.89
Hasta 6 cuotas sin intereses con BCP, BBVA y Diners
Llega en 5 a 10 días hábiles
con envío
Tienes garantía de entrega
Conoce más detalles
UNIVERSAL MOUNTING FOOTPRINT – Shares the same hole pattern as Scotty, RAM, Cannon, and other legacy deck mounts for easy upgrades without drilling new holes MODERN ACCESSORY COMPATIBILITY – Converts older kayak deck holes into mounting points for YakAttack LockNLoad bases and other MightyBolt-style accessories EASY INSTALLATION ON MOST KAYAKS – Works with rotomolded, ABS, and inflatable kayaks; installation hardware included for both deck and inflatable installs DURABLE & LOW PROFILE – Made from marine-grade polymers with beveled edges that minimize line snags; resistant to corrosion, UV damage, and rough use MADE IN THE USA – Covered by YakAttack’s Built for Life Guarantee; designed, tooled, and manufactured entirely in the USA for premium reliability
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Saber más.
Visa
Mastercard
American Express
