SKU/Artículo: AMZ-B00W3D5N36

seeed studio

SeeedStudio - Bus Pirate v3.6 - Universal Serial Interface - DIY Maker Open Source BOOOLE

Detalles del producto
Disponibilidad:
En stock
Peso con empaque:
0.30 kg
Devolución:
No
Condición
Nuevo
Producto de:
Amazon
Viaja desde
USA

Sobre este producto
  • Bus Pirate v3?is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips. A laser cut acrylic case for Bus Pirate v3.6 is also available. Protocols 1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols. Features: - USB interface, USB powered - 5volt tolerant pins - 0-6volt measurement probe - 1Hz-40MHz frequency measurement - 1kHz-4MHz pulse-width modulator, frequency generator - On-board multi-voltage pull-up resistors - On-board 3.3volt and 5volt power supplies with software reset - Macros for common operations - Bus traffic sniffers (SPI, I2C) - Transparent USB to serial bridge mode - 10Hz-1MHz low-speed logic analyzer - Custom support in?AVRDUDE?,?Flashrom?,?OpenOCD - AVR STK500 v2 programmer clone - Scriptable from Perl, Python, etc. - A bootloader for easy USB firmware updates - Uses?DP6037 standard PCB layout - Open source (CC 0/Public Domain)
S/ 481.29
55% OFF
S/ 218.76

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

S/ 481.29
55% OFF
S/ 218.76

Hasta 6 cuotas sin intereses con BCP, BBVA y Diners

Llega en 15 a 25 días hábiles
con envío
Tienes garantía de entrega

Conoce más detalles

USB interface, USB powered. 5volt tolerant pins. 0-6volt measurement probe. 1Hz-40MHz frequency measurement. 1kHz-4MHz pulse-width modulator, frequency generator. On-board multi-voltage pull-up resistors. On-board 3.3volt and 5volt power supplies with software reset. Macros for common operations. Bus traffic sniffers (SPI, I2C). Transparent USB to serial bridge mode. 10Hz-1MHz low-speed logic analyzer. Custom support in AVRDUDE , Flashrom , OpenOCD. AVR STK500 v2 programmer clone. Scriptable from Perl, Python, etc. A bootloader for easy USB firmware updates. Uses DP6037 standard PCB layout. Open source (CC 0/Public Domain).