System Three T-88 Epoxy Adhesive, 0.5 Gallon

Size:

0.5 Gallon

0.013 Gallon

0.25 Gallon

0.5 Gallon

10 Gallon

2 Gallon

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
2.39 kg

Devolución:
Sí

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

For well over 35 years T-88 epoxy has been the most widely used structural epoxy adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, our marine, wood and metal epoxy will cure at temperatures as low as 35ºF. When fully cured, it is unaffected by water, oil, kerosene and many other chemicals. It will not stain wood and is immune to rot. This wood and marine epoxy system is unique and it may be applied to damp wood, provided it is worked well into the surface. T-88 is a high-performance, non-brittle two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. System Three T-88 is a clear amber resin and becomes virtually invisible when varnished. This penetrating epoxy for wood exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.

S/ 575.53

31% OFF

S/ 396.91

S/ 575.53

31% OFF

S/ 396.91

Llega en 5 a 10 días hábiles

con envío

Tienes garantía de entrega

Medios de pago

Cantidad

Medios de pago

Conoce más detalles

Premium Epoxy: T-88 is a high-performance structural 2-part epoxy adhesive; Our wood- and marine epoxy is endorsed by leading designers, builders and organizations Easy To Apply: Apply a liberal coat of T-88 clear epoxy resin to both surfaces; When clamping, avoid applying too much pressure, as this can starve the joint of glue, resulting in weak bond strength Versatile Application: T-88 is waterproof and it exhibits outstanding adhesion and performance on a wide variety of materials like metal, wood and composites Fast Curing: At 70°F, T-88 develops good properties within 16 hours and it cures to a clear amber appearance Tips And Tricks: When coating large areas with T-88, consider using a V-notch trowel for a uniform adhesive application