





Artículo: MKT-624978_BF5FB34A
Triple camera Dash Cam Wide Angle 1080P triple camera Dash CAM HD recording
En stock
0.58 kg
No
Nuevo
Vendedor Verificado
- Product specification: Model: H35 Display: 4.0-inch TN screen External port: MINI USB 5V/1A power port supports up to 32G Class10 TF card 2.5mm digital rear-recording camera port Functional features: Front camera: 120° wide Angle GPS track: Not supported AV OUT: Not supported Rear view camera: 5.5m line length /2.5mm interface Photo: Support Lens rotation: Manual adjustment is supported Dynamic range adjustment: Supported HDR: Supported Reverse full screen: Supported Video format: AVI Image format: JPG Storage compression method: AVI Battery type: 80mAh polymer lithium battery Gravity sensing: Supported Motion detection: Supported Delayed shutdown: Supported Loop recording: Supported, no missing seconds Recording function: Supported Night vision light: Support (manually turned on) Parking monitoring: Supported Front camera video resolution: Max 1920*1080 (25f/s) Camera resolution: HD640x480 (25f/s) Photo resolution: up to 3M
Producto prohibido
Este producto no está disponible
Conoce más detalles
Function introduction 1. Use the automatic recording function Start the car engine, the recorder automatically starts and opens the recording function. Turn off the car engine, the recorder automatically saves the recording content and shuts down, and the recorded image is saved in sections on the TF card. When the TF card is full, the recorder will preferentially cover the earliest recorded image. 【 Note 】 a. The recorded period can be set in the menu, the range is closed and 1/2/3 minutes 4. b. The recorder video is saved in the DCIMA and DCIMB folders in the TF card (if there is an in-car camera or rear-view camera). 2. Use the photo function In the startup state, press [OK] to stop recording, press [M] to enter the photo mode, and press OK to take photos. To switch back to recording mode, press the [M] key a few times. 3. Use motion detection (motion detection) In the standby state, go to the menu screen to enable the motion detection mode. When the camera senses that there is a moving object in the surrounding area, the machine enters the camera state, and the system stops recording after 30 seconds of recording. To exit motion detection mode, disable motion detection on the menu screen. 4. Gravity sensing function This machine has built-in G-sensor. If there is a serious vehicle collision, the recorder will lock the image data of the first 5 seconds and the last 10 seconds when the accident occurs. At the same time, the lock icon is displayed above the display screen. The locked image is saved as a special file, which is not overwritten by the loop. [Tip] G-sensor supports sensitivity adjustment, which can be changed in the setting menu according to actual needs. 5. One-key lock function