28pcs Dent Remover Tool for Car,Car Dent Puller Kit,Paintless Dent Repair Kit for Dent Removal,Dent Removal Kit,Perfect for Paintless Dent Repair Kit on Cars, Doors, and Fridges (Short T Kit)

Conoce más detalles

Features: Used as a adapter for slide hammer or pulling tap for easy catching and pulling. A necessary component for dent repair, direct replacement for the broken one. Easy installation, the thread size is M10 for better application. How to use this paintless dent repair kits 1 .Clean the dent with a clean wet cloth 2. Mount the glue stick into the glue gun, pull the triggerto let the glue stick enter into the glue gun, connect thepower source and preheat for 5 minutes 3. Use a proper drawing gasket. Large dent requires alarge drawing gasket. 4. Pull the trigger and apply the drawing gasket with ex-truded glue 5. Fast place the drawing gasket with hot melt glue atthe center of dent, press lightly until the glue cures andadheres (Let the glue cool for about 8 minutes. Thecooling time should be less than 10 minutes and shouldbe shorter slightly in winter) 6. Align the T-shaped repairer and press the drawinggasket with hot melt glue, pull the sliding rod backwardsto pull up the dent 7. Check with a Line board. If dent still exists, knock itslightly with a flattening hammer or pen 8. Clean the repaired place with a clean wet cloth 9. If the operation would not succeed,please operate repeatedly. Question 1: The glue is not firm enough, the glue is debondedwhat is the reason? 1. The viscosity of hot melt adhesive is related to thetemperature. Suitable for temperatures ranging from 20 ℃ to 28 ℃. Note: Do not operate under the sun in summer, and theoperating temperature in winter is above 10 C (if theweather is very cold, you can first pour hot water on thewagon in the recess) 2. If the car has been waxed or plated with crystal filmor the material of the recess is not iron sheet, the sticki-ness of the tape will be greatly affected. 3. It may be that the product is dusty during use. Beforeuse, it is best to use alcohol to clean the rubber strip,the dent surface and the gasket. 4. If it detaches when operated at a suitable temperature, this is a normal phenomenon, and it only needs torepeat the operation. If the depression cannot be repaired after repeated operations, it may be that the puller is not suitable for pro-cessing the depression. This is related to the shape. position and size of the depression. Not all depressionscan be repaired with one product, which has nothing todo with the glue. Question 2: How to remove the glue You can use alcohol above 95 degrees, while tearing itagain and spraying alcohol, the residual glue can bebuttoned off with your fingernails. Asphalt, gasoline ordiesel can also be used. (Because alcohol is flammable and cannot be transported, please buy it locally. Sorry for the inconveniencecaused.) Specifications: Item Weight: 0.77 Pounds Package include: 1 * T-shaped repairer dent lifter 1 * Small Hot Melt Glue Gun 18 * Dent Puller Tabs 5 * Glue Sticks 1 * Plastic Shovels 1 * Empty Bottle 1 * blue cloth ❤️❤️Warm notes: 1. It is not recommended to use if the body has been waxedthere is a car coat, a film has been coated, or the paint sur-face is cracked. 2. The dent is not a metal sheet, or the dent is in a particular-ly hard place such as the body beam and cannot be repairedwith tools.