SYMIK Insta 360 X5 Battery Charger for Insta360 X5 Accessories, 27W Dual Fast Charging Case w/LCD Display, Intelligent Two Way Charger Hub for Insta360 X5 Batteries, Shows Battery SOC, Charger Only

0 5 4 23

23 calificaciones

Disponibilidad
En stock

Peso con empaque
0.23 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

MUST READ: 1. Make sure to insert the battery firmly into the charging ports until you hear a "click" sound. 2. Please note that a 30W Power Delivery (PD) power adapter and a USB-C to USB-C cable are required for Fast Charging. The USB-C cable included with the X5 Camera can be used. If you are using a USB-A to USB-C cable, the charging case will likely only receive 5V. In this scenario, you will not be able to charge both batteries simultaneously due to insufficient input power
Yes 20W charging! Yes, definitely, for sure this case is able to charge a battery at up to 20W! You just need to set it to 20W/Channel (Read the instruction manual) in the settings Menu. Factory default is set to 12W+12W because many folks use aftermarket batteries which have issues if charged over 12W. Also the dual 12W configuration has good balance between speed and efficiency. You can set the chargers to 20W+7W total 27W mode so that you can charge the first battery from 0% to 80% in 35 minutes which is only a few minutes slower than the OEM charging case
Intelligent 5 in 1 Battery Charger for Insta360 X5: 27W Dual Channel Fast Charging Case, 10W Output Power Source, Battery Accumulation Device, Battery Even Out Equalizer and Battery Storage Case 5 functions in one device. NOTE: CHARGER ONLY, no internal or X5 battery
Unparalleled Intelligence: Comes with 1.47" High Definition Crispy LCD screen which displays real-time metrics (SOC, voltage, health cycles, temperature, power source capabilities) for informed battery management. Know your battery status at a glance with clear
Unparalleled Charging Accuracy: Equipped with highly accurate charging management chips from Texas Instruments, enable ±8mV accuracy (vs. -45mV typical accuracy of others), with per-channel calibration to eliminate over/undercharging risks
Bi-Directional Power Source Function: Discharge stored Insta 360 X5 battery power via 10W USB-C output to charge phones or devices when needed, ideal for emergencies or on-the-go use. (Note: This product is a charger only, it does not come with any built-in battery)
Battery Optimization Modes: Merge partial charges into a full battery (Accumulation Mode), when feasible, preventing the need for battery replacement mid-use. Or balance charge levels (Even Out Mode) to maximize lifespan and storage safety
Designed to Follow OEM Charging Specs: SYMIK for Insta360 X5 battery charger features the same charging profile as the OEM chargers do; Does NOT harm your battery in any way. Implemented high and low temperature protection which adds another layer of safety