COB LED Strip Lights, 16.4ft Ultra High Density 12V Tape Light, 480LED/m, CRI 90+, 5mm Width Cuttable Flexible Dimmable LED Lighting for Home Indoor Decor&Commercial Use (No Power Supply)

0 5 3 10

10 calificaciones

Color:

Red

Size:

5mm PCB

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Sobre este producto

Ultra-High Density Light Source: DC12V 16.4FT COB LED light strip featuring 480 COB LED chips per meter, 5mm Board width, Red, CRI(Ra)>90, 7w/m, IP20 rating(indoor use only ), Cuttable every 0.98inch(25mm). Enjoy ultra-bright, uniformly even illumination with no granular effects—COB LEDs are brighter, softer, and free of dark spots compared to traditional SMD LEDs, providing continuous, energy-efficient lighting.
Flexible Installation System: Each unit is cuttable every 0.98 inches (25mm) and features high-temperature resistant yellow 3M adhesive backing. It installs quickly and easily right out of the box—simply peel and stick, with no soldering or electrical expertise required. (Tip: Clean and dry the installation surface thoroughly before applying.)
Buy with Assurance: Built with a genuine double-layer copper PCB that enhances electronic conductivity and heat dissipation, ensuring a lifespan of over 60,000 hours. Our customer support is available around the clock to assist with any troubleshooting, replacement, or installation inquiries.
Cuttable & Linkable Design: The strip is soft, flexible, and can be cut at marked solder points. It comes equipped with a female and a male 5.5mm x 2.1mm DC plug on each end, allowing for direct power supply connection or end-to-end daisy-chaining.
Wide Application: Ideal for a variety of interior decoration projects including kitchens, bedrooms, living rooms, hallways, ceilings, stairs, mirrors, wall backlighting, car lighting, accent lighting, cabinet lighting, corridors, DIY backlighting, and more. It’s also suitable for special uses as well as commercial and residential lighting projects.
Package Contents: Includes 1 x 16.4FT COB LED light strip (power supply or dimmer not included), 1 x non-wired solderless connectors, 1 x connector with 20AWG Extension Wires and 1 x user manual. The end wire connectors are designed for extending your COB strip, splicing, corner connections, or directly connecting to a power supply.
Power Calculation: The actual power consumption of a 16.4FT LED strip is influenced by voltage drop. For example, a DC12V 16.4FT LED strip with 480 LEDs/m consumes about 23W—not 35W (i.e., not simply 7W/m x 5m). The 35W calculation is inaccurate as it fails to account for voltage drop.

$29,45

29% OFF

$20,89