Artículo: AMZ-B0DTDLGDN1

Makerfocus

MakerFocus 2pcs 3.7V 1100mAh Lithium Rechargeable Battery 1S 1C LiPo Battery with Protection Board, Insulated Rubber Tape and Micro JST 1.25 Plug for ESP32 Development Board

Size:

2

Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • Overcharge Protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection
  • Over-discharge Protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
  • Short Circuit Protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
  • Charging Method: Recommended charging current is 0.2A, with a maximum of 1A. Recommended discharge current is 0.5A, the maximum is no more than 1A, the protection board is equipped with mos tube, the overcurrent protection (instantaneous) is 1.6-2.2A, and the charging voltage setting is recommended to be 4.2V
  • Note: Overcurrent protection is not a panacea, please do not continue to charge and discharge with large current, or the current and voltage beyond the range, otherwise the protection board will be damaged and invalid

Producto prohibido

Este producto no está disponible

Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

Specification: Standard Voltage: 3.7V Capacity: 1100mAh Discharge Rate: 1C Working Current: 1.5A Maximum Discharge Current: 3C Overcurrent Protection: 1.8-2.1A Connector Type: Micro JST 1.25 Approximate Weight: 19g Dimensions (±2mm): 50*30*8mm(L*W*H) Standard Charging Method: Charge the battery to 4.25V with a constant current of 0.2C, and then charge it with a constant voltage of 4.2V until the charging current is less than or equal to 0.05C Package Content: 2 * 1100mAh 3.7V Lithium Rechargeable Battery

Mega deals
Ver más