Artículo: AMZ-B0D47J71XZ

Teyleten robot

Teyleten Robot ESP32S ESP32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller for Arduino (ESP32 38P Type-C, 3PCS)

Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • 1. The Development Board continues 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs.
  • 2. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient.
  • 3.small volume. Easy to embed into any product
  • 4.Powerful, support LWIP protocol, freertos
  • 5.Support three modes: AP, STA, AP+STA coexistence mode
  • 6.in Arduino IDE,choose ESP32 DEV
  • 7.The maximum operating voltage of the ESP32 is 3.3V. The ESP32 has an on-board voltage regulator that can withstand voltages up to 5V using the VIN and GND pins. Once a voltage is input to the ESP32 development board's VIN pin, that voltage is passed through the ESP32's on-board voltage regulator (AMS1117), which outputs a constant 3.3V, which is the board's operating voltage. Note: The maximum operating voltage of the ESP32 is 3.3V. The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V. The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V.USB power supply is 5V.
$26,30
49% OFF
$13,49

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$26,30
49% OFF
$13,49

Hasta 6 meses sin intereses con Pacificard, Diners, Discover y Titanium

$15 OFF con el cupón PRIME

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

This board is already soldered! Data Feature: Complete microcontroller with WLAN (802.11bgn) and Bluetooth (Classic and LE). Reset and boot buttons are available, so a new firmware can be quickly and easily installed. The development board combines a CPU with 2 Tensilica LX6 cores, clocked at up to 240 MHz, and 512 kilobytes SRAM in a single microcontroller chip. Warm Tips: When you download the program to development board, you need to press the IOO button for 1-2 seconds. 38P and 30P board sizes and circuit layouts are different.

Mega deals
Ver más