Artículo: AMZ-B0CYH9WYVW

Generic SIM-IPE Ethernet IP DHCP and Bootp Server Profinet and SIM-ALP2 Analog Simulator +/- 0-10VDC & 0-22mA

Disponibilidad
En stock
Peso con empaque
0.35 kg
Devolución
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • Both SIM-IPE and SIM-ALP2 with cables and a case
$1.258,25
60% OFF
$503,30

Producto no disponible

Este producto no está permitido por la aduana del país en categoria 4x4

Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito, Crédito y Deuna

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

Both SIM-IPE and SIM-ALP2 with cables and a case... comes with BOTH SIM-IPE Same functions as the old but more features. Menu contents now are dynamic and are based on the discovered device. Also now supports Profinet It replaces your computer based BOOTP/DHCP Server and will quickly assign any IP address to any industrial BOOTP or DHCP enabled control device, like Programmable Controller, PLC communication modules, smart switches and I/O adapters. Functionality -Detect unknown IP detection -Set IP address -Service DHCP/BOOTP requests -Change static IP address (Target device must comply with Ethernet/IP CIP specification) -Enable Bootp or DHCP to static or dynamic(Target device must comply with Ethernet/IP CIP specification) - 10/100 Full/Half duplex support with auto negotiation - Device info display via Ethernet/IP: Model, Revision, Serial number SIM-ALP2 Complete troubleshooting kit... This is our electronic display version of our Current Loop Simulator/Generator was developed to assist maintenance personnel and integrators in 4 to 20 mA analog input testing and 0-10 Vdc, troubleshooting and application development for a reasonable cost. Also included is our soft protective case and leads with alligator clips, both sets of leads are included This is our version of the Fluke 707.... just for a lot less money Simulate a 2 wire 0-22 mA loop powered device, a 4 wire 0-22mA current source, or a +/- 10VDC signal without an external power supply. Simulating is easy in 1 or 0.1 mA/V increments by simply clicking the up and down buttons. Each point can be individually calibrated to suit your needs.