Creality Official Space Pi Filament Dryer Plus,Dual-Spool Filament Dryer Box for 3D Printing with PTC Heater,360° Fast Heating,4'' LCD Touch Screen,One Key Set,Compatible with PLA PETG ABS TPU ASA PA

0 5 4 312

312 calificaciones

Color:

Space PI Plus

Disponibilidad
En stock

Peso con empaque
2.67 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

Dual Spool Filament Dryer Box: Each Creality Space PI Plus is equipped with 4 filament holes and PTFE pipes, which can dry 2 rolls of 1KG filament at the same time, meeting the needs of users to dry a vide range of filaments and 2 3D printers at the same time, saving space and making the work area tidier.
New PTC Fast Heater: 360° Hot Air Circulation: Different from the general PI heaters on the market, our unique PTC heater can heat up faster and are more energy-efficient. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
One‑Touch Filament Presets: The Space Pi Plus features one‑touch temperature presets for 12 popular 3D‑printing materials (PLA, TPU, ABS, ASA, PETG, PC, PA, PET, PLA‑CF, PETG‑CF, and PA‑CF). Simply select your filament type, press the button, and the drying chamber will automatically run at the preconfigured temperature to ensure optimal drying performance.
4’‘ Touch Screen for Easy Operation: The Creality Space Pi Plus Filament Dryer Box comes with a 4’‘ touch screen which can clearly and brightly display temperature and time, making it simple for you to track drying conditions. With the touch screen, you can easily adjust the temperaturefrom 45℃ to 70℃, and set the drying time from 0 to 48 hours, make sure the filament is completely dry to print the results better.
Parameter Power-off Memory: No need to readjust parameters every time you start up. After a power outage, the filament dryer can remember your previous filament and temperature settings, allowing for quick start drying.
Rest assured: We offer a one-year free replacement service. If the product you received has quality issues or is damaged during use, please contact us for a free replacement. If you encounter the following codes: E1 – Temperature >79°C; E2 – Thermistor short circuit; E3 – Software anomaly; E4 – Lid open or temperature fails to rise, please follow these steps: At startup, verify that room temperature is displayed. If so, open the lid, set the heating, and wait 10 minutes to see if an E4 alert occurs. If E4 or EA appears immediately, reboot the device. If the issue persists, contact support. For optimal performance, in colder conditions, preheat the thermistor area.
NOTE: To power on, press and hold the power button on the screen for about 2 seconds and the Space Pl will power on normally.

$122,99

21% OFF

$97,17