Newborn 930-GTD Drip-Free Caulking Gun Bundle with Gorilla Heavy Duty Construction Adhesive

Conoce más detalles

Newborn 930-GTD Drip-Free Smooth Hex Rod Cradle Caulking Gun with Gator Trigger Comfort Grip, 1/10 Gallon Cartridge, 10:1 Thrust RatioThe Newborn 930-GTD Drip-Free Smooth Hex Rod Cradle caulking gun has a steel half-barrel frame that fits 1/10-gal. cartridges and has a 10:1 thrust ratio for use with low viscosity materials such as latex. The smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod. The rod retracts after each pull of the trigger, removing pressure from the tube to help prevent dripping. The handle and trigger are padded for comfort. There is a welded plate in the back for securing the cartridge in place. A seal puncture tool and a spout cutter are built into the side of gun for opening cartridges without a knife, and the hook on the back allows it to hang on a ladder. Caulking guns, also called caulk or cartridge guns, dispense a controlled flow of products such as caulk, sealants, and adhesives from a tube or cartridge. A manual caulking gun consists of a frame which holds the tube, a trigger, and a rod which moves forward when the trigger is depressed, dispensing the product. Manual caulking guns have a thrust ratio; the higher the thrust ratio, the easier it is to dispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking guns also have a frame and a trigger, but are used with an air pressure regulator that pushes the product from the tube using air pressure instead of a rod. Newborn Brothers Company, Inc. manufactures sealant and adhesive dispensers and accessories. The company was founded in 1974 and is headquartered in Jessup, MD.Gorilla Heavy Duty Construction Adhesive, 9 Ounce Cartridge, White, (Pack of 1)Gorilla Heavy Duty Construction Adhesive is a tough, versatile, all-weather adhesive. It’s 100% adhesive formula provides a long-lasting, heavy duty bond. We call it All Surface, All Purpose. The durable, 100% waterproof formula holds up indoors and out and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foam board, marble and more! Directions: All surfaces should be clean and free of dirt, grease and oil. Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors. 1. Unscrew nozzle, cut tip of cartridge, replace nozzle and cut to desired bead size. Insert into cartridge gun. 2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps. 3. Within 10 minutes, press surfaces together and hold for 20-60 seconds. For smaller product check out our 2.8oz Construction Adhesive Tube. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla glue company.