PETG 3D Printer Filament 1.75mm,Multicolor,Chameleon,Color Change with Light and Angle,1kg(2.2lbs) Accuracy +/-0.05mm for ender3 Cr10

0 5 4 88

88 calificaciones

Disponibilidad
En stock

Peso con empaque
1.07 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

Stronghero3D PETG chameleon filament, color change with light and angles, multi color, green-blue-purple color and chameleon effect background .Conceal layer with tiny sprinkling flake,starry,shiny.
PETG easy to absorb moisture. To achieve the best printing results, please use it within 24 hours after opening the package. Otherwise, dry it at 70 degrees for more than 3 hours and sealed storage.
Please closely observe whether the first layer of printing is well adhered,the cooling fan must be turned off, Printing speed must be very low, 12-20 mm/s. If there is any abnormality, please restart printing.
Printing tips: recommend heat bed 70°C, nozzle: 220-230°C, speed 25-37mm/s,rectration length 3-5mm,rectration speed 40-50mm/s,not for high speed printing.
Better flow ,premium PETG . It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package , net weight 1KG/Spool
Controlling the moisture content of the PETG material is critical for 3D printing because the PETG molecular structure automatically tends to dehydrate even when the vacuum package is not opened. Drying temperature 70, lack of equipment can be exposed to the sun exposure for 4 hours.
100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you.

$67,82

60% OFF

$27,13