



Artículo: AMZ-B09M3W6ZLB
KZ AZ09 Pro TWS Bluetooth 5.2 QCC3040 Ear Hook Earphone Upgrade Cable Support Apt-X HD with Charging Case for C Pin Headset
Sin stock
0.20 kg
No
Nuevo
Amazon
- ?QCC3040 Bluetooth Chip ,Overwhelmingly Powerful Performance ?Equipped with Qualcomm QCC3040 chip, the new Bluetooth 5.2 transmission efficiency is free from interference, with higher transmission speed, more stable transmission signal, lower delay and longer endurance performance.
- ?Apt-X HD Pure Sound Quality ,high-definition Analysis ,restores Shocking Sound Field? Apt-X decoding provides professional high-quality audio with more high-definition resolving power, easily present the immersive sound field with rich details.
- ?TWS+ Dual Transmission Technology, Single Earphone Can Also Be Used ?The left and right earhooks of AZ09 Pro can be directly connected to the mobile phone. Compared with the transmission technology of the main and auxiliary earphones, the dual transmission delay is lower and the response is faster.
- ?CVC Call Noise Reduction Technology Achieve HD Calls ? Through the highly sensitive microphone and the CVC call noise reduction technology, it can effectively offset the call echo and ambient noise , only retain the natural and clear original sound of the call, and it will not affect voice communication in a noisy room.
- ?Mini Portable Charging Case Battery Life Up To 48h+ ? The Bluetooth earhooks can be used for 8 hours when it is fully charged, and the charging case provides about 6 additional battery life for the Bluetooth earhooks.
- Connectivity technology: Wireless
Sin stock
Seleccione otra opción o busque otro producto.
Conoce más detalles
Attention Please: *This product is only for Bluetooth upgrade earhook, without earphones!!! C PIN for ZEX / EDX Pro / ZAS / ZSX / ZSN / ZSNPRO / ZS10 PRO / AS12 / AS16 / ZSN PRO X / ZAX / ASX / DQ6 Product Specifications: Product Model : KZ AZ09 Pro Bluetooth Version: 5.2 Bluetooth Range:≈15m Earhooks Weight: 4.5g (single) Charging case weight:≈85g Earhooks battery capacity: 50mA Charging case battery capacity: 800mA Wear it correctly and comfortably: "L" is for the left ear, and "R" is for the right ear. 2. Connect the Bluetooth earhooks to the earphone, put the earphone into the mouth of the ear canal, push it gently, and push it straight in the earphones. Try the following steps if you fail getting connection between the two ear hooks, or between ear hooks and a device.1. Clear the pairing record between the earbuds and all your devices.2. Turn off the bluetooth of all your nearby devices.3. Place back both ear hooks on the case and make sure they are in charging status. Close the lid, wait 6 seconds.4. Open the lid, when both light are up (any light) press and hold both MFBs for 10 seconds until together red/blue indicators flash twice. Release the MFBs and the ear hooks will turn off.5. After a second both ear hooks will turn on and will start fast flashing blue, on two seconds, they will synchronize, slow flash blue twice and then stop flashing.6. The (R) ear hook will start flashing between red/blue, indicating that is ready for pairing with a device, the (L) ear hook should be slow blinking blue.7. Turn on the bluetooth on one device, pair it again with the KZ AZ09-Pro listed option. Both ear hooks indicators should be now slow flashing blue almost at the same time.8. Remove them from the case, place them on your ears, play some music or video,sound should be coming from both ear hooks.