Artículo: AMZ-B09J95SMG7

Teyleten robot

Teyleten Robot ESP32S ESP32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller for Arduino (ESP32 38P, 3PCS)

Size:

ESP32 38P

Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • 1. The Development Board continues 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs.
  • 2. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient.
  • 3.small volume. Easy to embed into any product
  • 4.Powerful, support LWIP protocol, freertos
  • 5.Support three modes: AP, STA, AP+STA coexistence mode
  • 6.For arduino IDE,choose ESP32 DEV,make sure that your program or run a program smaller than the ESP32 configuration
  • 7.The maximum operating voltage of the ESP32 is 3.3V. The ESP32 has an on-board voltage regulator that can withstand voltages up to 5V using the VIN and GND pins. Once a voltage is input to the ESP32 development board's VIN pin, that voltage is passed through the ESP32's on-board voltage regulator (AMS1117), which outputs a constant 3.3V, which is the board's operating voltage. Note: The maximum operating voltage of the ESP32 is 3.3V.The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V.USB power supply is 5V.
$18,30
7% OFF
$17,07

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$18,30
7% OFF
$17,07

Hasta 6 meses sin intereses con Pacificard, Diners, Discover y Titanium

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

This board is already soldered! Data Feature: Complete microcontroller with WLAN (802.11bgn) and Bluetooth (Classic and LE). Reset and boot buttons are available, so a new firmware can be quickly and easily installed. The development board combines a CPU with 2 Tensilica LX6 cores, clocked at up to 240 MHz, and 512 kilobytes in a single microcontroller chip. Warm Tips: When you download the program to development board, you need to press the IOO button for 1-2 seconds. 38P and 30P board sizes and circuit layouts are different.

Pre-deals Prime Day
Ver más