QPKING Car Fuel Injector Signal Generator,GDI Fuel Injection System Cleaners,Fuel System Cleaning Assistant Fuel Injector Cleaner for 12V Standard Injector/75V High Volt Injector Simultaneously

0 5 4 29

29 calificaciones

Disponibilidad
En stock

Peso con empaque
0.56 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

🚓【Solve Common Failures Of Fuel Injector】：Easily solve common faults such as stuck, blocked, leaked, or insufficient combustion of the fuel injector.
🚓【Standard Fuel Injector & High-Pressure Fuel Injector】The fuel injector cleaning kit is not only suitable for standard injectors in gasoline engines, but also for high pressure injectors in diesel engines. Configurable 12V and high voltage drive options. The high voltage is suitable for 70V, 120V and other injectors.
🚓【Wide Operating Frequency & Time Range】: The operating frequency range of the car fuel injector cleaning tester can reach 600~6000 rpm, the working time setting range can reach 0~99 minutes.
🚓【Fuel Injector Cleaner Tester With LCD Display】: Working frequency and time are digitized for more precise adjustment.
🚓【Perfect Match】: Car Fuel Injector Signal Generator high-volt injector drive mode can be used with the fuel injector cleaner & tester. Also, it can be used to enhance all fuel injector pulse signals.
🚓【Two Injectors Can Be Tested At The Same Time & Two Types Of Power Supply】: CT60 Fuel Injector Signal Generator is equipped with two different size adapters, which can be connected to two nozzles working at the same time (old and new injectors can be contrasted) to compare the sprayability state and spray angle of fuel injection.Injector cleaner is equipped with a power adapter and a alligator clip power cable,you can use the 12V battery on the vehicle as a power source or connect it to an AC 110V/220V power supply.
🚓【Adjustable Fuel Injector Tester】: CT60 Fuel Injector Signal Generator is possible to set multiple pulse outputs and adjust speed, pulse width,operating time and other parameters as required and clearly displayed on the LCD display for more accurate adjustment.The working frequency range of the injector tester can reach 600~4000 rpm, and the working time setting range can reach 0~99 minutes.During the cleaning process,pulse cleaning can be achieved by adjusting the RPM and width to optimize the cleaning effect.

$146,23

49% OFF

$74,99