









Artículo: AMZ-B083KBM8K8
DC Worm Gear Motor 24V Low Speed 20RPM Reversible High Torque Speed Reduce Turbine Electric Gearbox Motor 8mm Shaft with Install Bracket
En stock
0.57 kg
No
Nuevo
Amazon
- ✔Rated voltage: DC24V; No-load speed: 20RPM; Rated torque: 18kg.cm; Package: 1Pcs x DC Gear Motor + 1Pcs x Bracket + 4Pcs x M4 Mounting Screw;
- ✔DC Motor Body Dimensions: 31 x 57mm/ 1.22" x 2.24"(D*L); Gear Box Dimensions: 58.1 x 40.1 x 35mm/ 2.28"x1.57"x1.37"(L*W*H), Output Shaft Dimensions: 8 x 15mm/ 0.31" x 0.59"(D*L) with 1x 13mm/ 0.039*0.51(H*L) flat cut off; Wire Length: 19mm/7.4";
- ✔You can change the wiring-connection to change shaft rotation direction,with self-locking, the output shaft can't rotation when power-off, that is self-locking; the reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size.
- ✔How to choose the torque: if driven by a pulley, the radius of the pulley is 1cm, the pulling force of the belt is 25kg; if the radius of the pulley is 2cm; the pulling force of the belt is 12.5kg, and so on; and transmission efficiency and grinding coefficient must be considered in combination with the actual situation;
- ✔Applications: Windows, Doors opening and Household electrical appliances, Car model, Boat model, Robot model, DIY engine, Industry application, house application, home automation ,mini winch and other occasions.
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
Friendly Reminders: (1)Motor Wiring: Connect the red lead to the positive electrode and the black lead to the negative pole. Reversing these connections will make the motor rotate in the opposite direction. (2)Overload: Stay within the specified load range whenever possible. Avoid blocking the motor or running it near stall conditions, as this can cause the motor to burn out. (3)With self-locking, the output shaft can't rotation when switch off, that is self-locking. (12) Gearbox output shaft and motor shaft are come to be a rectangle, it's widely used in various of occasions that require special install size.