Magneto Slot Machine Skateboard | 40" x 9" | Premium Longboard | Bamboo Maple Fiberglass Construction | Barefoot Traction | Fully Assembled for Men Women Adults Teens | Free Skate Tool

0 5 4 138

138 calificaciones

Disponibilidad
Sin stock

Peso con empaque
3.75 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

MADE BY SKATERS All of our boards are designed by skaters and inspired by our location in Southern California, the birthplace of longboarding. Many of our design cues come from the local surf culture and natural materials, we let the simple aesthetics shine on their own. We also prioritize our customer service and want you to be completely stoked with your new board. All messages are replied to within 24 hours and we’ll do our very best to ensure satisfaction and maximum cruising on our boards.
PATENT PENDING SLOT The Slot Machine features a patent-pending slot that is cut through the entire thickness of the deck. The slot is a half-inch wide and runs the entire length of the board and increases turning and carving performance. While turning or carving the inside part of the deck naturally bends more than the outside part of the deck. This shortens the inside length of the deck allowing the deck to conform with the turn. Skate tool included.
STABLE PUSHING When pushing on the slot machine each side of the deck bends slightly inward. This forms a subtle taco shape around your foot on top of the deck. In other words, the concave of the deck slightly changes while pushing and goes back to normal when riding.
UPGRADED BEARINGS The Slot Machine comes with our Slicks ABEC 9 race bearings already installed for increased speed and smooth ride right out of the box.
QUALITY MATERIALS The Slot Machine comes with our Slicks ABEC 9 race bearings. 70mm Shore 78A wheels means your board is designed from the ground up for an ideal riding experience. These soft wheels allow for a smooth ride on a variety of different surfaces. This board features Paris Style trucks with a 7 inch hanger and kingpin angle of 50 degrees. The bushings are SHR (medium stiffness) which adds to the carving experience.