Artículo: AMZ-B07QZTNYTB

Aolikes

KARUF 3.7v 1800mAh Battery Replacement for Corsair HS70,HS75 XB, Void Pro RGB Headset, HyperX Cloud III/Cloud II Headset

Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • ➤ 3.7v 1800mAh battery for Corsair wireless gaming headset battery replacement, compatible with Corsair VOID/ Void PRO/ Void RGB/ HS75 XB/ Corsair Hs70SE/ Corsair Hs70/ Void Pro RGB-Dolby 7.1 Surround Sound Headphones and more.
  • ➤ Built-in li-ion battery protection module, battery nominal voltage 3.7v, fully charged 4.2v, Capacity 1800mAh, Compatible with "HyperX cloud stinger 2" battery replacement, HyperX Cloud II Headset battery replacement.
  • ➤ Lithium cobaltate cell, higher charge and discharge performance, good consistency.compared with other cell of the same size, pure lithium cobaltate cell has higher capacity. So, the1800 large-capacity battery provides long battery life for Corsair headphones.
  • ➤ Before replacing, Please contrast with the old battery and to check the polarity of the battery. Red wire is power positive " +" , Black wire is power negative pole "-". if is a reversed, you need position of interchange wires. // for some models of Corsair model headphones, it may be necessary to solder the wires, you can cut off the plug and solder the wires to the original position.
  • ➤ HOW TO SWAP WIRE POSITIONS ?? ---The polarity of the wires was reversed in comparison to the original battery in the headset. This is not a problem--NO SOLDERING IS REQUIRED-- you will need to take the wires out of the plastic plug and reverse them only. To do this, take the smallest screwdriver or small blade you own, very gently pry up the two plastic tabs on the top of the plug one at a time, and gently pull the wire out of the plastic plug.( Don't yank!)
  • REPLACEMENT BATTERY IS COMPATIBLE WITH CORSAIR WIRELESS GAMING MOUSE. BEFORE REPLACING NEED TO SWAP WIRES POSILTION OF CONNECTOR PLUG. Some models of Corsair headphones require cutting off the plug and soldering the wires onto the PCB board.
  • ➤ Before replacing for the Corsair Wireless mouse battery, need to check the wire posiltion of battery pack, Red wire connection power positive " +" , Black wire connect power negative pole "-". it's a reversed,need to swap wires posiltion of connector plug,
  • For HyperX Cloud II Core Wireless battery replacement,HyperX Cloud Flight Cloud Alpha battery replacement.

Producto prohibido

Este producto no está disponible

Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Mega deals
Ver más