Artículo: AMZ-B07P6MJPTD

Waveshare

2.9inch e-Paper Display Module, 296x128 Resolution 3.3V/5V Two-Color epaper Display E-Ink Screen Module SPI Interface Compatible with Raspberry Pi/Arduino/Jetson Nano,Support Partial Refresh

Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • SPI interface, Compatible with Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples Compatible with Raspberry Pi/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
$51,76
31% OFF
$35,70

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$51,76
31% OFF
$35,70

$10 OFF con el cupón: ZAPATOSMIA

Tus compras en Tiendamia no pagan el arancel de $20

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conoce más detalles

Overview This is an 2.9inch E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Specifications Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 89.5mm × 38mm Display size: 66.89mm × 29.05mm Dot pitch: 0.138 × 0.138 Resolution: 296 × 128 Display color: black, white Grey level: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mW(typ.) Standby power:<0.017mW Viewing angle: >170° Interfaces VCC-3.3V GND-GND DIN-SPI MOSI CLK-SPI SCK CS-SPI chip select (Low active) DC-Data/Command control pin (High for data, and low for command) RST-External reset pin (Low for reset) BUSY-Busy state output pin (High for busy) Package Content 2.9inch e-Paper Module x1 PH2.0 20cm 8Pin x1Note:Online development resources and technical support are provided, pleae contact with us to get if you need.

Mega Deals Zapatos
Ver más