









Artículo: AMZ-B00JKOJKXA
Green-Ox® Renew
En stock
4.61 kg
No
Nuevo
Amazon
- CLEANS TOUGH STAINS AND ODORS
- NO HARD SCRUBBING OR PRESSURE WASHING REQUIRED
- ENVIRONMENTALLY FRIENDLY || BIODEGRADABLE || NON-TOXIC
- QUALITY RESULTS || OUTPERFORMS COMPETITORS PRODUCTS
- ELIMINATES ORGANIC STAINS
Producto prohibido
Este producto no está disponible
Conoce más detalles
Green-Ox Renew is an earth-friendly cleaner that restores and revitalizes weathered wood surfaces to their original appearance without hard scrubbing or pressure washing! Its powerful, non-toxic formula quickly eliminates the toughest stains and odors For Use On... Wood: Decks, Docks, Fences, Pallets, Log Cabins, and more! Concrete, Bricking, Grout, Stone, Stucco, Composite Decking, Vinyl, Siding. Fabric: Awnings, Carpet, Patio Furniture, Umbrellas, Boat Sails. Directions for Use... 1. ACTIVATE. Add Green-Ox Renew plus Green-Ox Activator to one gallon or larger plastic garden sprayer and mix for 2 minutes. After mixing, product should be used within 1 - 2 hours. Begin cleaning process with a dry surface; it should not be visibly wet with water. Excessive water is undesirable and will dilute cleaning efficiency. 2. MIST. Spray activated Green-Ox Renew onto the surface generously and evenly; start with a 10′x10′ area. Oxygen will create foam as it reacts with contamination. After 15 minutes of OXYGEN ACTION, use a stiff brush/broom to ensure uniform contact; wipe smooth surfaces with a sponge. Harsh scrubbing is not required. Avoid direct sunlight when possible. One gallon cleans approximately square feet, depending on the severity of dirtiness/stains and surface porosity. 3. WAIT. Allow 15 minutes of contact time. Do not allow the surface to dry prior to rinsing; keep the surface wet with Green-Ox Renew foam! 4. RINSE. Rinse the area with a hose. Repeat steps 1-4 in small sections until the entire surface is clean.