Creality Falcon2 22W Laser Engraving Machine, Laser Cutter with Triple Monitoring System, for Metal and Wood, Paper, Acrylic, Glass, Leather etc., 400 mm*415 mm

0 5 5 1

1 calificaciones

Disponibilidad
En stock

Peso con empaque
10.28 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

【Maximum Cutting Capacity of 22W】The Creality Falcon 2 laser engraver has FAC spot compression technology, which can increase the laser power to 22W through the spatial combination of 4 powerful 6W laser diodes. 22W laser module, higher power, stronger penetration, thicker, deeper and faster cutting. The high-density laser can easily cut 15 mm plywood, 10 mm dark acrylic and 0.1 mm thin sheet metal, Class Ⅲa, 120000 mW output power.
【High Speed and High Precision】Compared to the Creality 10W engraving machine, the cutting speed of the Creality falcon 2 laser engraver is increased by 200% and the engraving speed is increased by 100%. Out of the box, you can usually assemble a Creality falcon 2 laser engraver in 10 to 20 minutes.
【Color Engraving】The Creality falcon 2 laser engraving machine can create hundreds of colors on metal surfaces using a super-strong laser beam. It also supports offline creation and dynamic visualization, making it easy to use without a computer.
【The First Integrated Air Assist】The integrated air assist can not only be adjusted manually via the knob, but also intelligently adjusts the airflow via the LightBurn software to blow away smoke and dust during the engraving process, protect the laser head lens and make the cut cleaner and smoother, so as to keep the edge of the work clean.
【Triple Intelligent Monitoring System】The Creality Falcon 2 laser engraver has a triple intelligent monitoring system that includes airflow, flame and lens monitoring. It reminds the user of the size of the airflow and stops the machine immediately if a flame is detected. The lens monitoring system triggers an alarm when the lens is dirty.
【Compliance Statement】Our Creality Falcon2 22W laser engraver meets specific regulatory safety requirements and is registered with the U.S. Food and Drug Administration (FDA) as a laser engraver. We have provided the following documentation: 1) Certification from a Nationally Recognized Testing Laboratory (NRTL) that my product has passed 21 CFR 1040.10 or IEC 60825-1; 2) FDA numbering documentation; 3) The laser class and power output level (in mW) have been stated on the detail page: Laser class: IV , laser output: 22000mW

$1.544,37

55% OFF

$701,99