Monport 30W Fiber Laser Engraver with LightBurn, Fiber Laser Marking Machine with Red Dot Pointer, 5.9"x5.9" Metal Etching Machine for Metal Marking with 100000 Hour Lifespan BSLcad Included

0 5 5 6

6 calificaciones

Size:

30W+Lightburn

Disponibilidad
En stock

Peso con empaque
3.69 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Sobre este producto

Brand New Integrated Mini Fiber Laser: The brand new Monport fiber marking machine has a smaller size and lighter weight; Simultaneously maintaining the original high performance and a lifespan of up to 100000 hours.The fiber laser can engrave all metals. (gold, silver, copper, stainless steel, brass, titanium, etc.)
Faster and More Accurate: The newly customized galvanometer system is equipped with more expensive silicon material reflectors, allowing for a maximum speed of 10000mm/s. Monport has also customized an F-theta field mirror, which, together with the entire marking system, can achieve a carving accuracy of 0.01mm.
Just Right Working Area: For a 30W fiber laser, an area of 150*150mm is optimal, as excessive engraving area may result in poor engraving effect or even distortion.After special tuning by Monport, even when carving at the edges, there will be no weak light.
Deep Engraving and Cutting Capabilities: With this 30W fiber laser marking machine, you can perform 2.5D metal engraving, deep metal engraving, and even some metal sheet cutting (usually the higher the power, the stronger the deep engraving and cutting ability, and the higher the efficiency. If you want stronger and faster results, Monport recommends purchasing a 50W or above machine)
Lightburn Compatible: All Monport fiber marking machines can be operated using Lightburn, but if you don't want to use Lightburn, we also provide free and easy-to-use software (Free software and backup parameters are saved on a USB drive and included in the packaging).
Laser Class 4, 30000 mW output power. Model:YXF30

$2.985,82

31% OFF

$2.059,19